DataSheet_SB16C1053APCI_v106

SB16C1053APCI
PCI Target Controller with 2 Serial, 1 Parallel and MIO Bus
PCI to 2S+1P with MIO Bus Bridge
JULY 2013 REV 1.06
8
■
■
■
Software (Xon/Xoff) / Hardware (RTS#/CTS#) Flow Control
- Programmable Xon/Xoff Characters
- Programmable Auto-RTS and Auto-CTS
Interrupt Poll Control
Optional Data Flow Resume by Xon Any Character Control
■
■
■
■
■
■
■
■
■
■
■
■
Optional Data Flow Additional Halt by Xoff Re-transmit Control
Control pins for RS-422 Point to Point/Multi-Drop Auto Control
Control pins for RS-485 Echo/Non Echo Auto Control
Programmable Auto Control signal assertion width of TXEN and RXEN#
Software Selectable Baud Rate Generator
Prescaler Provides Additional Divide-by-4 Function
Programmable Sleep Mode
Programmable Serial Interface Characteristics
- 5, 6, 7, or 8-bit Characters
- Even, Odd, or No Parity Bit Generation and Detection
- 1, 1.5, or 2 Stop Bit Generation
False Start Bit Detection
Line Break Generation and Detection
Fully Prioritized Interrupt System Controls
Modem Control Functions (RTS#, CTS#, DTR#, DSR#, DCD#, and RI#)
2.3 Parallel Interface
■
■
Parallel port used to transfer data between a host PC and a peripheral such as a
printer.
Support All IEEEStandard 1284 Protocols (Compatibility Mode, Nibble Mode, Byte
Mode, EPP Mode and ECP Mode)
16-byte FIFO for SPP/ECP mode
2.4 MIO Bus Interface
SB16C1053APCI offers 8-bit Legacy Bus for additional 4 serial ports. SystemBase
revised effective 8-bit data bus for from 1-port up to 32-port expandable serial Multi-Port.
The name is MIO(Multi-Port I/O) Bus
TM
.
SB16C1053APCI supports 4-port serial mode and 6-port serial mode using the MIO
Bus
TM
.
3. Ordering Information
Table 3–1: Ordering Information
Part Number
Package
Operating Temperature Range
Device Status
SB16C1053APCI-TQ
128-Pin TQFP
-40 ℃ to +85 ℃
Active