sLAN_all-PoE_UserManual_Eng_DM v1.0.1

sLAN/all-PoE User Manual

Network Setting

Network Setting page will be displayed in the initial screen of the Web setting, which shows the Network information of the

equipment as below:

You can set network environments and network management in the Networking Setting page. Once you have changed the

settings, you must press the [Submit] button to save the changed value and restart it through the [Reboot] menu to apply

them to actual equipment operation. If you exist without saving the changes, the changed value will be lost.

If you have not saved the modified value by the [Submit] button, you can return to the value before changing with the [Cancel]

button.

The main features of Networking Setting page are as follows:

Menu Default Description

Device Name sLAN/all Set the name of the device

MAC Address Own Address Show MAC Address

Connection Type Static

Select whether to use Static IP to use fixed IP or Dynamic IP to use

assigned IP using DHCP

IP Address 192.168.0.223

Set the current IP address

(If the Connection Type is Static IP, enter the IP address directly. If

DHCP, the current IP is displayed and cannot be changed.)

Subnet Mask 255.255.255.0

Set the current Subnet Mask address

(If the Connection Type is Static IP, enter the subnet mask address

directly. If DHCP, the current subnet mask address is displayed and

cannot be changed.)

Gateway 192.168.0.254

Set the current Gateway address

(If the Connection Type is Static IP, enter the gateway address

directly. If DHCP, the current gateway is displayed and cannot be

changed.)

DNS 168.126.63.1 Set the IP address of the DNS(Domain Name Service)