sLAN_all-PoE_UserManual_Eng_DM v1.0.1

sLAN/all-PoE User Manual

Serial Setting

You can set the operating environment for serial ports in the Serial Settings page. Once you have changed the settings, you

must press the [Submit] button to save the changed value and restart it through the [Reboot] menu to apply them to actual

equipment operation. If you exist without saving the changes, the changed value will be lost.

If you have not saved the modified value by the [Submit] button, you can return to the value before changing with the [Cancel]

button.

If Operation Mode is COM Redirector in the Operation Settings, the current serial settings are ignored and changed to the

settings when the virtual COM Port is connected.

The main features of the Setup Menu are as follows:

Menu Default Description

Interface RS-232 Set the interface of the serial port(Option: RS-422/485)

Termination

Disable Set the termination resister when the serial is RS-422 or RS-485.

RS-422 Multi-

Drop Mode

Master

Set the operation mode when serial communication is made in RS-422

interface. Set Master to Master, Slave to Slave in RS-422 Multi-Drop

configuration. For 1:1 connection other than RS-422 Multi-Drop mode, set both

connecting equipment to Master.

Baud Rate 9600 bps

Set the communication speed of the serial port

(Option: 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200,

230400, 460800, 921600bps)

Data Bits 8

Set the number of bits which make up the byte

(Option: 5, 6,7,8)