sLAN_all_UserGuide_Eng_DM v1.1.1

sWiFi/all User Manual
14
5. Configuration Web Page
Configuring a sLAN/all through the web page is explained.
Minimum Requirements
For network environments with speed of 10Mbps or lower, configuration through the web page is not supported.
PC
10Mbps
sLAN
To configure through the web page, the network speed must be 100Mbps or faster. If a sLAN/all is directly connected to the
computer it will also work. If setting the below environment is difficult, use the SGConfig utility to configure the device. For
directly connecting the device with your computer, please refer to Chapter 4 Connecting Network.
PC
100Mbps
sLAN
PC
sLAN
Login
Open a web browser and enter the IP address of the sLAN/all. An authentication window will appear. The default ID is “slan”,
and password is “99999999” without quotes.