4954348COM 16" cabinet B344954348COM0 Date of Purchase ___ / ___ / ___ Lot Number: Do Not Return This Product! Contact our customer service team for help first. Call: 1-866-452-4081 (toll free) Monday-Friday 9am - 5pm CST Visit: www.systembuild.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Secure Your Furniture Keep your home and family safe with the wall anchor kit that is included with the product.
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-866-452-4081 Monday-Friday 9am - 5pm CST Visit systembuild.com to view the limited warranty valid in the U.S. and Canada. You Tube Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 1 HOUR - Open your item in the area you plan to keep it to avoid excessive heavy lifting. - Identify, sort and count the parts before attempting assembly.
k Quic bly em Ass Tip Before You Start P P P P P Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.
systembuild.
Board Identification Not actual size D F Bottom 37360348041 E B A Adjustable Shelf (3) 37360348060 Shelf (2) 37360348051 Left Panel 37360348013 Right Panel 37360348023 This piece is paperboard construction. It is not made from wood but is required for the assembly of your unit. H G Back Panel K736034800 Door 34954348070 systembuild.
Board Identification Not actual size This piece is paperboard construction. It is not made from wood but is required for the assembly of your unit. B H E E F A F F G D systembuild.
Part List Actual Size 1 2 (x8) #A22620 (x8) #A22610 cam lock 6 (x4) #A12930 1-1/8" screw 3 (x8) #A12420 cam bolt (x2) #A17400 7/8" bolt shelf support confirmat 8 9 (x33) #A21110 (x2) #A89210 nail (x12) #A80250 (x4) #A23030 5/8" screw 7 5 4 door pad Not Actual Size 10 (x1) #A52385 handle 12c 11 12a 12d 12b (x4) #A44145 (x1) 12 #A84050 adjustable foot safety bracket kit 13 (x3) #A65615 hinge systembuild.
STEP 1 2 (x4) #A22610 2 A 2 2 2 systembuild.
STEP 2 2 (x4) #A22610 2 B 2 2 2 systembuild.
STEP 3 1 12a (x8) #A22620 12b 12b Do not fully tighten this screw in this step. (x1) #A84050 12a 1 1 E 1 1 1 E 1 Quick Assembly Tip Proper orientation of CAM LOCK systembuild.
STEP 4 All unfinished edges will face up. UNLOCK LOCK E A E B systembuild.
STEP 5 3 11 6 (x8) #A12420 (x4) #A12930 6 (x4) #A44145 3 3 Unscrew the two piece foot as shown. After top part of foot is attached to bottom shelf, screw on bottom part of foot. Be sure all four feet are level with each other. 11 D systembuild.
STEP 6 4 (x4) #A23030 4 B A D 4 4 4 finished edge systembuild.
STEP 7 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. 6 WARNING Please make sure that the Backs are attached securely. All nails must be driven into the parts straight and tightened firmly. Failure to do so could cause instability, product collapse, and/or serious injury. (x33) #A21110 AVERTISSEMENT Attached the back panel as shown nailing straight into the raw edges. Assure that the unit is square. Distance from corner to corner must be equal as shown.
STEP 8 12c 12d For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. (x1) #A84050 IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT. MAKE SURE UNIT IS LEVEL BEFORE SECURING TO THE WALL. WARNING Serious or fatal crushing injuries can occur from furniture tipover.
STEP 9 5 (x12) #A80250 5 5 F 5 5 F F systembuild.
STEP 10 13 (x3) #A65615 G 13 systembuild.
STEP 11 10 7 (x2) #A17400 (x1) #A52385 NOTE: The door can be mounted on either the left panel or right panel, depending on which way you want the door to open (right or left). Shown is for the door to be mounted on the left panel. Attach the door as shown by screwing the screws from the hinge plate onto the side panel. 10 G A 7 7 systembuild.
STEP 12 Door Adjustment To adjust the vertical height: Loosen the screws "A" on both hinges. They are usually in slotted holes which allows you to adjust up or down by a few mm. Then tighten back up. To adjust the depth: Loosen the screw "B" and adjust door. systembuild.com 19 A B A C To adjust side to side: Loosen the screw "C" on BOTH hinges and tighten "B" moves door outward. Loosen "B" and tighten "C" moves doors inward.
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 9 0 lbs. 0 kg. (x2) #A89210 40 lbs. 18.1 kg. 9 35 lbs. 15.8 kg. 50 lbs. 22.7 kg. Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television. Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc.
Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit systembuild.
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-866-452-4081 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.systembuild.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere).
Español Página 12 Desatornille el pie de dos piezas como se muestra. Despuéw de que la parte superior del pie se una al estante inferior, atornille en la parte inferior del pie. Esté weguro que los cuatro son nivelados el uno con el otro. Página 14 Conecte los panel trasero como se muestra clavando directamente en los bordes sin procesar. Asegura qie e; inidad es cuadrada. Distancia de esquina a esquina debe ser igual como se muestra por favor.
Español Página 18 NOTA: La puerta se puede montar en el panel izquierdo o derecho, dependiendo de la forma en que desee que se abra la puerta (derecha o izquierda). Se muestra que la puerta se monta en el panel izquierdo. Fije la puerta como se muestra atornillando los tornillos de la placa de bisagra en el panel lateral. Página 19 Para ajustar la altura vertical: Afloje los tornillos "A" en ambas bisagras.
Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-866-452-4081 (sans frais) du Lundi au Vendredi de 9h à 17h Heure Centrale Visitez: www.systembuild.com ATTENTION Le meuble peut basculer et causer des blessures graves ou la mort.
Français Page 14 Attachez les panneaux arrière comme indiqué en cliquant directement dans les bords bruts. Assurez-vous que le meuble està égallté. La disancee de coin doit être égale comme montré. IMPORTANT: Le panneau arrière est une partie structurelle de cet appreil et doit être installé correctement. Page 15 Pour la maçonnerie, le béton ou d'autres matériaux de mur : Visiter votre quincaillerie locale pour obtenir des ancres appropriées qui permettront de fixer solidement le support de sécurité.
Français Page 18 REMARQUE : La porte peut être montée sur le panneau gauche ou le panneau droit, selon la façon dont vous voulez que la porte s'ouvre (à droite ou à gauche). Il est indiqué que la porte est montée sur le panneau gauche. Fixez la porte comme indiqué en visser les vis de la plaque de charnière sur le panneau latéral. Page 19 Pour ajuster la hauteur verticale : Desserrez les vis "A" sur les deux charnières.
