8964056COM Storage Cabinet B348964056COM0 Date of Purchase ___ / ___ / ___ Lot Number: Do Not Return This Product! Contact our customer service team for help first. Call: 1-866-452-4081 (toll free) Monday-Friday 9am - 5pm CST Visit: www.systembuild.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Secure Your Furniture Keep your home and family safe with the wall anchor kit that is included with the product.
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-866-452-4081 Monday-Friday 9am - 5pm CST Visit systembuild.com to view the limited warranty valid in the U.S. and Canada. You Tube Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 1 HOUR - Open your item in the area you plan to keep it to avoid excessive heavy lifting. - Identify, sort and count the parts before attempting assembly.
k Quic bly em Ass Tip Before You Start P P P P P Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.
systembuild.
Board Identification Not actual size C B A shelf (2) 31117056030 D S This piece is paperboard construction. It is not made from wood, but is required for the assembly of your unit. Bottom 31117056040 F Left Panel 31117056010 Right Panel 31117056020 H G Door (4) 38964056070 systembuild.
Board Identification Not actual size C B S F G G A C F G G DWR SIDE DWR BACK D DWR BTM DWR SIDE This piece is paperboard construction. It is not made from wood, but is required for the assembly of your unit. systembuild.
Part List Actual Size 1 (x8) #A22620 cam lock 2 3 (x8) #A22610 cam bolt (x8) #A21660 wood dowel 6 5 4 8 10 9 7 (x10) #A11080 7/16" flat head screw (x4) #A21970 drive fastener 12 11 (x2) #A11160 5/8" flat head screw (x8) #A17400 8-32 x 7/8" (x2) #A89020 bumper 13 17d 15 16 (x4) #A12930 1-1/8" round head screw (x8) #A12420 5/8" round head screw systembuild.
Part List Not Actual Size 18 (x5) #A52395 handle 21 (x2) #A54520 drawer bracket 22 19 20 (x1) #A54900 drawer brace (x8) #A65615 hinge 23a left cabinet member 23b right cabinet member 23c left drawer member 23d right drawer member (x1) 23 #A56770 drawer slide kit (x4) #A44145 foot systembuild.
STEP 1 2 23a 7 (x4) marked with "L" left cabinet member (x1) (x3) 2 2 A 2 2 7 7 7 7 23a systembuild.
STEP 2 2 7 (x4) 23b marked with "R" right cabinet member (x1) (x3) 2 2 B 2 7 7 2 7 7 finished edge marked with "R" systembuild.
STEP 3 3 1 Quick 17a Assembly Tip 17b (x8) (x8) (x1) Proper orientation of CAM LOCK Do not tighten screw. 1 17b 3 17a 1 1 3 C 1 3 1 3 3 3 1 C 1 1 3 3 systembuild.
STEP 4 13 9 11 (x2) (x2) 22 14 (x4) (x4) (x8) 9 13 22 11 14 14 D top surface finished edge 22 22 D bottom surface 22 Unscrew the two halves of the foot. Attach bottom half to bottom (D) and screw top half back on. systembuild.
STEP 5 LOCK UNLOCK Cam locks (1) on top surface. All finished edges will face up. A C systembuild.
STEP 6 UNLOCK All finished edges will face up. C B C A systembuild.
STEP 7 4 (x4) All finished edges will face up. B 4 A D 4 4 4 systembuild.
STEP 8 12 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. (x42) With the help of another person, turn your unit over on its front side as shown. Position the back panel as shown. Align squarely with all outer edge. Assure that your unit is square. Distance from corner to corner must be equal as shown. Attach the back panel as shown nailing straight into the raw edges. 12 S "raw surface shown" Assure that your unit is square.
STEP 9 6 21 (x2) (x4) DWR SIDE 21 21 6 6 DWR SIDE 6 6 systembuild.
STEP 10 6 (x4) Be sure the groove in the drawer sides are centered with the groove in the drawer front. 6 6 6 DWR SIDE 6 DWR SIDE H systembuild.
STEP 11 DWR BTM DWR SIDE finished surface DWR SIDE STEP 12 H You will need to tap the drive fasteners (8) lightly with a hammer to securely fasten. 8 8 DWR BACK DWR SIDE (x4) #A21970 8 8 DWR SIDE systembuild.
STEP 13 7 23c 15 left drawer member 18 23d (x4) right drawer member (x1) #A56770 (x1) (x2) Note: Attach slides (23c&23d) first then attach handle. 7 7 DWR BACK 23d DWR SIDE 7 DWR SIDE 15 7 H 15 23c 18 systembuild.
STEP 14 6 20 (x1) (x2) Turn drawer over. Using two screws (6), attach the drawer brace (20) as shown. 6 6 H 20 DWR BACK systembuild.
STEP 15 10 19 18 (x8) (x4) (x8) 19 19 10 G 10 18 x4 systembuild.
STEP 16 17c For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. 17d IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT. MAKE SURE UNIT IS LEVEL BEFORE SECURING TO THE WALL. OPTION 1: Attachment into a wall stud (preferred method) Using a stud finder, locate a stud in the wall.
STEP 17 16 (x2) With the help of another person, attach the four doors as shown by screwing the screws from hinge plate into the side panels. Peel and stick bumpers (16) onto front edge of top shelf where top doors (G) meet. 16 G G G A G G systembuild.
STEP 18 Install the drawer as shown below. Follow adjustment details below to adjust drawer. G Note: The drawer bracket holes are slotted. Drawer front can be adjusted by loosening screws, making needed adjustments and retightening screws. G H G cabinet member G roller systembuild.
STEP 19 Door Adjustment A B A To adjust the vertical height: Loosen the screws "A" on both hinges. They are usually in slotted holes which allows you to adjust up or down by a few mm. Then tighten back up. C To adjust side to side: Loosen the screw "C" on BOTH hinges and tighten "B" moves door outward. Loosen "B" and tighten "C" moves doors inward. To adjust the depth: Loosen the screw "B" and adjust door. systembuild.
STEP 20 5 Using the shelf supports (5), place an adjustable shelf (F) behind each door area. (x8) #A80250 5 F F 5 systembuild.
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 0 lbs 0 kg 35 lbs 15.8 kg 20 lbs 9.1 kg 35 lbs 15.8 kg 50 lbs 22.6 kg Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television. Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc.
Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit systembuild.
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-866-452-4081 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.systembuild.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere).
Español Página 12 Desenrosque las dos mitades del pie. Fije la mitad inferior a la parte inferior (D) y atornille en la mitad superior. Página 13 Cerraduras de leva (1) en la superficie superior. Página 16 ¡IMPORTANTE! EL PANEL POSTERIOR ES UNA PARTE ESTRUCTURAL DE ESTA UNIDAD Y DEBE INSTALARSE DE MANERA ADECUADA. Con la ayuda de otra persona, dé vuelta su unidad sobre su lado frontal tal como se muestra. Coloque el panel posterior como se muestra. Alinee directamente con todo el borde exterior.
Español OPCIÓN 1: Fijar en una viga en la pared (método preferido) Usando un detector de vigas, localice una viga en la pared. Coloque la unidad contra la pared con el soporte de seguridad alineado en esta ubicación. Para hacer el atornillado más fácil puede perforar un agujero piloto de 1/8" de diámetro (3 mm) a través del soporte de seguridad en la viga. Atornille a través del soporte de seguridad en la viga de la pared. Apriete el tornillo de que no se apretó completamente en el paso 3.
Español Página 27 Usando los soportes del estante (5), coloque un estante ajustable (F) detrás de cada área de la puerta. Página 28 CARGA MAXIMA Esta unidad ha sido diseñada para soportar la carga máxima anotada. El exceder estos límites puede causar inestabilidad, colapsarse y/o causar serias lesiones. ADVERTENCIA: Riesgo de lesiones a las personas - no coloque un televisor sobre muebles. Este mueble no está aprobado para su uso con un televisor.
Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-866-452-4081 (sans frais) du Lundi au Vendredi de 9h à 17h Heure Centrale Visitez: www.systembuild.com ATTENTION Le meuble peut basculer et causer des blessures graves ou la mort.
Français Page 12 Dévissez les deux parties du pied. Fixez la moitié inférieure à la moitié inférieure (D) et vissez la moitié supérieure. Page 13 Serrures à cames (1) sur la surface supérieure. Page 16 IMPORTANT! LE PANNEAU ARRIÈRE EST UNE PARTIE STRUCTURELLE DE CET APPAREIL ET DOIT ÊTRE INSTALLÉ CORRECTEMENT. Avec l'aide d'une autre personne, retournez votre pièce sur sa face avant comme indiqué. Positionnez le panneau arrière comme indiqué. S'aligner perpendiculairement à tous les bords extérieurs.
Français OPTION 1 : Fixation dans un poteau mural (méthode préférée) À l'aide d'un détecteur de montants, repérez un montant dans le mur. Placez votre appareil contre le mur, le support de sécurité étant aligné à cet endroit. Pour faciliter l'enfoncement de la vis, vous pouvez percer un trou pilote de 1/8'' de diamètre (3mm) à travers le support de sécurité dans le montant. Enfoncez la vis à travers le support de sécurité dans le montant mural. Serrez la vis qui n'a pas été serrée à fond à l'étape 3.
Français Page 27 A l'aide des supports de tablettes (5), placer une tablette réglable (F) derrière chaque zone de porte. Page 28 CHARGES MAXIMALES Ce meuble a été conçu pour supporter les charges maximales indiquées. En excédant ces limites de charge, le meuble pourrait devenir instable, s'effondrer, et/ou causer des blessures graves. AVERTISSEMENT : Risque de blessure corporelle - ne pas placer une télévision sur ce meuble. Ce meuble n'est pas approuvé pour une utilisation avec une télévision.
