Installation Guide

6
B347446059P01
11 /16
?? www.ameriwood.com ??
stud
montante
planche
wallboard
muro
mur
hole
agujero
trou
Option 1:
Securely screw (18c) into solid area of the wall as shown.
Opción 1:
Atornille firmemente (18c) en el área sólida de la pared como mostrado.
Option 1:
Vissez solidement (18c) dans une région solide du mur comme montré.
Option 2:
Drill a 3/16" diameter hole (5mm) in the wallboard. Tap the wall anchor(18d) into the hole
until it is flush. Fasten the wall bracket (18a) to the wall anchor (18d) with the screw (18c).
Opcion 2:
Taladre un agujero de 3/16" de diámetro (5mm) en la pared. Golpea la ancla de pared
(18d) en el agujero hasta que sea parejo. Abroche la escuadra de pared (18a) al la ancla
de la pared (18d) con el tornillo (18c).
Option 2:
Percez un trou de 3/16" de diamètre (5 mm) dans le mur. Enfoncez l'ancrage mural (18d)
dans le trou jusqu'à ce qu'il soit à égalité avec le mur. Fixez le support mural (18a) à
l'ancrage mural (18d) avec la vis (18c).
Stand the unit upright and place against the wall.
Fasten the wall anchor (18a) to the wall using option 1 or 2.
Coloque la unidad en posición vertical y coloque contra la pared.
Fijar el anclaje de pared (18a) a la pared con la opción 1 o 2.
Placez le meuble debout et contre le mur.
Fixez le support mural (18a) au mur en utilisant l'option 1 ou 2.
18a
18b
18c
18d
x
18 1
18c
18d