User's Manual

IntelliTrac A3 Series User Guide

This document contains confidential, restricted, and proprietary information. The document has been prepared for the

exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in

part, without the prior, written consent of an authorized officer of S&T.

- 17 -

2.6 Firmware Upgrade

The IntelliTrac A Series device firmware is updated through the serial interface. The firmware update of the

device can be performed with the IntelliTrac A series firmware loader tool provided by S&T. It runs on

Windows based PCs. Please see the following step-by-step upgrade procedure.

(1) Connect the RS232 cable between device an PC.

(2) Turn on the device.

(3) Run AseriesLoader.exe, the following window is displayed.

(4) Click […] button to open firmware file which provide by S&T

(5) Click Write button and start firmware programming.

(6) When the writing progress 100% is reached, the device LEDs will start to fast blinking.

(7) Wait until device LEDs stop fast blinking.

(8) Firmware update complete.