CAREU WT1 Vehicle Tracker User Guide Version: 0.1 Reference No.: Date: November 20, 2012 SYSTEMS & TECHNOLOGY CORP.
General Information If any breakdown occurs due to the operation of the described product or users’ improper handling in accordance with the instructions of the document, S&T shall be liable for the General Conditions based on the delivery of the described product and the content of the document. This product is not designed for the use of life support appliances, devices or systems and thence a malfunction of the product might reasonably be expected to make personal injury.
Table of Contents Chapter 1 Introduction ................................................................................................. 5 1.1 Features ........................................................................................................... 5 1.2 Scope ............................................................................................................... 6 1.3 About WT1 ..................................................................................... …………….6 1.
CAREU WT1 Vehicle Tracker User Chapter 1. Introduction Thank you for your purchasing the CAREU W T 1 Vehicle Tracker. We are very pleased to introduce you our excellent product, and you will enjoy great benefits by applying such a smart device. The CAREU WT1 Vehicle Tracker is a n all-in-one device that integrates multiple applications of GPS (Global Position System), GSM (Global System for Mobile Communication) and GIS (Geographic Information Systems) with each other.
CAREU WT1 Lite Vehicle Tracker User Guide 1.2 Scope This document will guides you to start the CAREU WT1 Vehicle Tracker. However, as this document contains basic device configuration only, please see the CAREU WT1 Protocol Document for the advanced information. 1.3 About WT1 The CAREU WT1 Vehicle Tracker transmits the wireless signals such as location, peripheral, and vehicle control data to a control center.
CAREU WT1 Vehicle Tracker User 1.4 Hardware Architecture As hardware is concerned, the CAREU WT1 is comprised of a micro-controller, regulator, GPS receiver, GSM/GPRS modem, G-Force sensor, flash memory data storage, I/Os interface and LED status indicators. • Users can connect PC's HyperTerminal to the Diagnostic/setting port for the AVL configuration. • Chapter 1 G-Sensor for man down warning.
CAREU WT1 Lite Vehicle Tracker User Guide 1.
CAREU WT1 Vehicle Tracker User Chapter 2. Taking a Tour of CAREU WT1 This chapter will guide you to the major connectors of the WT1 device. 2.
CAREU WT1 Lite Vehicle Tracker User Guide 2.2 Lateral view No. Red Button Blue Button Name SOS Page Description SOS Function,User define Message & Action mode LCD View change key,User define function.
CAREU WT1 Vehicle Tracker User 2.3 Front View No. Micro USB Reset Button Name USB Reset Description USB for change battery & Function set. H/W Reset Key.
CAREU WT1 Lite Vehicle Tracker User Guide Chapter 3. Getting Started with CAREU WT1 3.1 USB Device Driver Installation The CAREU WT1 communicates with your host computer by either RS-232 or USB interface. In some newer editions of Windows XP, the CAREU WT1 device can be installed as a "virtual COM port" device whereby the CAREU WT1 would automatically access Windows XP's inbox USB drivers.
CAREU WT1 Vehicle Tracker User 1. Automatic Installation If the wizard prompts to help you install the software for "STMicroelectronics Virtual COM Port". Select Install the software automatically (Recommended). Press the Next button to proceed. The wizard proceeds to install the driver.
CAREU WT1 Lite Vehicle Tracker User Guide The installation completes. In [Device Manager], the CAREU WT1 device is included under Ports (COM & LPT) as "STMicroelectronics Virtual COM Port". COM port number is displayed as well.
CAREU WT1 Vehicle Tracker User 2. Manual Installation After you select No, not this time, if the wizard only prompts to help you install software for "USB device", you need to manually install the driver. Select Install from a list or specific location (Advanced). Press the the Next button to proceed.
CAREU WT1 Lite Vehicle Tracker User Guide Select Search for the best driver in these locations. Check Include this location in the search. Press the Browse button to assign where your the CAREU WT1 device driver locates on your local disk. Press the OK button. You can download the USB device driver from http://www.systech.com.tw/downloads.php.
CAREU WT1 Vehicle Tracker User Press the Next button to proceed. The wizard proceeds to install the driver.
CAREU WT1 Lite Vehicle Tracker User Guide The installation completes. In [Device Manager], the CAREU WT1 device is included under Ports (COM & LPT) as "S&T Tracker". COM port number is displayed as well.
CAREU WT1 Vehicle Tracker User 3.2 Device Configuration 1. In Windows XP desktop, click Start | All Programs | Accessories | Communications | HyperTerminal. 2. If you are prompted to input the information of your location, complete them to proceed. 3. On the File menu of HyperTerminal, click New Connection. 4. In the Name box, type a name that describes the connection. In the Icon box, click an appropriate icon. Press the OK button to proceed. 5.
CAREU WT1 Lite Vehicle Tracker User Guide 6. In the connection that you have just set up, click File | Properties. Select the [Connect To] tab. From the [Connect using] drop down list, select the correct com port by checking it up at Windows XP's [DeviceManager] as previously mentioned on page 21. Go there by clicking Start | Control Panel | System | Hardware | Device Manager.
CAREU WT1 Vehicle Tracker User 7. In the File menu, click Properties. Click the [Settings] tab. Press the ASCII Setup button. 8. In the [ASCII Sending] group box. Select both Send line ends with line feeds and Echo typed characters locally. Press the OK button.
CAREU WT1 Lite Vehicle Tracker User Guide 9. Connect your the CAREU WT1 device to power as mentioned in Power and I/O Cable Connection on page 12. The device startup message will be displayed. 10. In [HyperTerminal] window, type in the command "AT$VERSION?" and press the Enter key. The hardware and firmware version will show. As long as your [HyperTerminal] window appears as the screenshot below, a connection between the device and your system has already been built up and working.
CAREU WT1 Vehicle Tracker User 3.3 Communication Settings The CAREU WT1 Vehicle Tracker communicates with your control center by either SMS or GPRS (TCP/UDP). Before the device is installed into a vehicle, communication parameters should be set. 1. SMS Configuration Use AT$SMSDST command to set a SMS control center phone number or short code.
CAREU WT1 Lite Vehicle Tracker User Guide 2. GPRS Configuration Set GPRS servers by using the folloiwng commands: AT$APN=internet,username,password (APN=internet, Username=username, Password=password) OK AT$HOSTS=1,0,60.148.19.10,6000 (Server IP address = 60.148.19.10 and Port number =6000) OK AT$RETRY=5,10 (Message retry settings) OK AT$IPTYPE=1 (Using TCP/IP mode) OK AT$GPRSEN=1 (GPRS enable) OK AT$HB=60,1 (Heartbeat setting) OK Please refer to the CAREU WT1 Protocol Document for more command details.
CAREU WT1 Vehicle Tracker User 3.3 GPS Tracking Configurations After the device communication settings are done, the remote GPS tracking is ready to function. The setting of GPS tracking can be done by using AT$PDSR command. For example, AT$PDSR=1,30,0,0,2,0,0,1,1 (Tracking through GPRS by time interval 30 seconds) OK For simple testing GPRS, run the TCP Server U-Series software which is provided by S&T. It is simple server software that can wait for device connection and data.
CAREU WT1 Lite Vehicle Tracker User Guide For advanced testing, you need the software Intelli TracerPlus. Please request this software through your sales contact. You can also apply for a testing account from S&T's FleetWeb solution through your sales contact.
CAREU WT1 Vehicle Tracker User The main page of the Intelli FleetWeb appears as below:
CAREU WT1 Lite Vehicle Tracker User Guide 3.4 Firmware Upgrade The firmware of the CAREU WT1 can only be updated through USB interface. With the firmware loader tool provided by S&T, firmware update can be done for the device. Such firmware loader runs on Windows-based systems. To upgrade the firmware, follow the procedure below: 1). 2). 3). 4). Connect the device to your PC with the USB cable. Connect the device to power. Power on the device. Run ServerUSeries.exe. A window displays as follows: 5).
CAREU WT1 Lite Vehicle Tracker User Guide Chapter 4. Technical Specification Characteristics Dimensions (L x W x H) 108 x 72 x 31mm Weight 165g Radio Performance Frequency Quad-band 850/900/1800/1900MHz GSM Functionality / GPRS GPRS Mode Multi-slot class 10 GPRS Coding Scheme CS1,CS2,CS3 and CS4 GSM Antenna Internal SIM Interface E- SIM (Built-in mainboard) GPS Functionality Receiver 50 channels Sensitivity (Tracking) -160dBm Antenna Type External GPS active antenna, 3.
CAREU WT1 Vehicle Tracker User Interface I/O Button Key Controls Emergency Button Function Button Electrical Power Source 500mA @ +5V Environment Operating Temperature –20 °C to +60 °C Battery Rechargeable Backup 3.7V / 550mAH Battery Note: The specification herein is subject to change without prior notice.
CAREU WT1 Lite Vehicle Tracker User Guide Systems & Technology Corp. (S&T), founded in 1987, is a market leader in Automatic Vehicle Locating (AVL) solutions, Geographical Information Systems (GIS) and navigation. It has formed a professional development team to innovate the most advanced and comprehensive GPS tracking products for the customers and has built a global service network to provide non-stop services and support.
CAREU WT1 Vehicle Tracker User Chapter 5. Regulation Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAREU WT1 Lite Vehicle Tracker User Guide Česky [Czech] [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Undertegnede [fabrikantens navn] erklærer herved, at følgende udstyr [udstyrets typebetegnelse] overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
CAREU WT1 Vehicle Tracker User fid-Dirrettiva 1999/5/EC. Magyar [Hungarian] Alulírott, [gyártó neve] nyilatkozom, hogy a [... típus] megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Polski [Polish] Niniejszym [nazwa producenta] oświadcza, że [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
CAREU WT1 Lite Vehicle Tracker User Guide DoC 法規版本 Declaration of Conformity Chapter 4
