User's Manual

CAREU
WT1
Lite
V
ehicle
T
r
acker User
Guide
Chapter 3. Getting Started with CAREU WT1
3.1 USB Device Driver Installation
The CAREU WT1 communicates with your host computer by either RS-232 or USB
interface.
In some newer editions of Windows XP, the CAREU WT1 device can be installed as a "virtual
COM port" device whereby the CAREU WT1 would automatically access Windows XP's
inbox USB drivers. While in some other earlier editions of Windows XP, you would need to
manually install the USB driver for the CAREU WT1 device. In the following content of this
section, you will be guided to how the installation can be done in both cases.
To install the device driver for the CAREU WT1, connect the CAREU WT1 device to
your system with an USB cable as mentioned in Mini USB Cable Connection on
section 3.1.
As soon as the connection is made between the CAREU WT1 and your computer, a
balloon appears above the notification area saying an USB device is found.
Click on this balloon to start the [Found New Hardware] wizard.
Select No, not this time. Press the Next button to proceed.