User's Manual
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. The Device
- Chapter 3. Getting Started with CAREU P2
- Chapter 4. Using the CAREU P2
- AT$SGF Self Geo-fence alert settings
- AT$SGFEN Self Geo-fence alert enable
- AT$PDSR Position and device status reporting settings
- AT$DOWN Man Down Detection settings
- AT$DOWNEN Man Down alert enable
- AT$SOS SOS Tracking Report Configuration
- AT$BLEEN BLE alert enable
- Chapter 5. About Systems & Technology Corp.
- Chapter 6. Declaration
- Chapter 7. Regulations
CAREU P2 Personal Tracker User Guide
16
Return Value
Write Command:
OK：PDSR
Read Command:
OK：PDSR
$PDSR=<Mode>,<Min. Time>,<Min. Distance>,< Reserve >, <Destination>,<
Reserve >,<Reserve>,<Time Multiplier>,<IgnoreGPS>
Error Response:
ERROR：PDSR
Example
Tracking every 30 seconds through GPRS
AT$PDSR=1,30,1000,30,2,0,0,1,0
OK：PDSR
Tracking every 60 seconds through GPRS and Logging every 15 seconds
AT$PDSR=1,15,1000,30,3,0,0,4,0
OK：PDSR
Note
If <Mode> is 3 and both <Min. Time> and <Min. Distance> parameters are
set, the position and data are only reported if both the minimum amount of
time has elapsed and the minimum distance has been traveled.
BV Certificate Use
2017/02/06 17:09