Warranty

Instructions
rnOnOff
Turn on the device with a short press of ower button. Turn off the device with
a long press of ower button. ower indicator will keep ON when the device is
turned on.
Sleep Mode
Enter sleep mode with a short press of ower/Sleep button when the device is
turned on. ower indicator will keep ON when the device entering sleep mode.
The Eyepiece Dioptre Adjustment
The purpose of dioptre adjustment is to get a clear image for users with different
vision. Rotate and adjust the dioptre adjustment ring until
you get a clear view of the four-character icon on the screen. One adjustment
only for each eye-view.
(lease note it's possible that the image is not clear without the adjustment
of objective lens.)
The Objective Lens Adjustment
Make sure the eyepiece dioptre adjustment is finished. Aiming at your target,
rotate and adjust the objective lens ring until you get a clear and well-focused
image.
IR Fill Light Control
Turn on the device, enter Black and W hite mode with a long press of R button.
Switch to R1-3 or off with a short press of R button. The part of fill light is
stretchable which can be pull out or push back to make a quick adjustment.
Red dot Adjustment
Turn on the device, then turn the laser on/off with a short press of Laser/Menu
button. The position of laser can be adjusted on the laser adjustment holes by a
hex-nut wrench.
Menu operation
Enter the menu with a long press of Menu button. ress / button to select
options. Enter a submenu with a short press of OK button. Exit the menu with a
short press of Menu button.
-7-
-8-
-9-
1.
2.
3.
4.
5.
6.
7.
>Reticle Adjustment
Enter the submenu reticle adjustment with a short press of OK button . Select
options with a short press of OK button. Adjust scope reticle or values with
some short press of / button .
To confirm your setting by enter “Save with a short press of + button , choose
“es with a short press of OK button To deny your setting by enter “Save
with a short press of  button, choose “No with a short press of OK button.
>Gyroscope
Enter the submenu Gyroscope with a short press of OK button. Select Display
or Calibration with a short press of / button. Select On or Off to turn
on/off the gyroscope after entering Display. Turn on the gyroscope before you
-10-
1
2