User's Manual
Table Of Contents
©2013 DJI Innovations. All Rights Reserved.2 |
iosEquipment List
iPhone 4s
iPhone 5
iPod touch5
iPad mini
iPad 3
iPad 4
Refer to the WM Assistant for more details.
Step4Flying Test Procedures
1. Slide the switch from OFF to ON, to start the main controller output according to the following chart.
Switch of the main controller output is OFF Switch of the main controller output isON
2. Start the motors.
3. The “View” page shows the relative parameters real-time when flying.
4. Go to the “Basic” and click into the “Gain” page to set the values of all gains real-time when flying.
5. Finish the flying and land your aircraft.
After landing, if you are trying to configure the other parameters, please slide the switch
from ON to OFF to enable other parameters configuration.
LED indicator blinks Purple and Yellow alternately (
) to inform you when youturn on or
turn off the main controller output.
How to Activate More Functions
In the Future you might be asked to fill in the new S/Nin the future if you brought new function upgrades.
Fill-in the S/N and then click Write button. If you filled in an invalid S/N over 30 times, your MC will be locked
and you have to contact our customer support.