User's Manual

Usage

Using the SRW-60G with a Ronin Series Gimbal

1. Loosen the screw of the clamp on the gimbal mounting adapter of the Transmitter. Then

attach the Transmitter to the arm of the Ronin-MX or Ronin-M and tighten the screw.

2. Link the HDMI Ports of the Transmitter and the camera by using a soft and exible HDMI

cable (not provided).

3. Connect the Power Port on the Transmitter to the CAN1 Port (or the USB port) of the

Ronin-MX by using the provided transmitter power cable.

CAN1 Port

USB Port

NOTICE

In order to avoid obstructing any gimbal movements, the cables can be

attached in the cable slot.