User's Manual Part 1

Ronin-M
User Manual
©
2015 DJI. All Rights Reserved.
13

The customizable handle bar of the Ronin-M can be removed, if necessary, by following the steps
below.
1. Loosen the two grip screws where the handle bar meets the gimbal, as shown.
2. Remove the grips from the handle bar.
3. You can remove one or both sides of the handle bar.

Balancing
To obtain the best performance from the Ronin-M, proper balancing is a must. Accurate balance is

horseback riding, biking, car mounts, helicopters, etc.). Proper balance will also offer a longer battery

setting up the software.
The camera needs to be fully configured, with all accessories, prior to installing and
balancing the camera on the gimbal. If the camera has a lens cap, be sure to remove it prior
to balancing. Be sure that the Ronin-M’s power is turned off while balancing the camera.
Balancing