User's Manual

Ensure that your computer is connected to the internet

Close all antivirus programs and network rewalls

Ensure that the device is turned on before beginning the

update process

Do not disconnect the USB cable until the update is complete

If the Thumb Controller fails to update, follow the steps below:

1. Press and hold the override button.

2. Use the USB cable to connect the Thumb Controller to the computer.

3. Now, release the override button and wait for the connection to

be established.

4. Click the “Update” button after the Thumb Controller has been

successfully connected to the Assistant. The Thumb Controller

will be operate normally after the update is complete.