User's Manual

Table Of Contents

AGRAS MG-1 User Manual

remote controller is linking to the aircraft. The Status LEDs will glow solid green when linking is complete.

4. Repeat Step 2 to turn off the remote controller.

Charging the Remote Controller

Charge the remote controller using the included charger. Refer to the figure below for more details.

Controlling the Spray System

Adjust the flying speed, record Point A and B, start or stop spraying, adjust spray speed, choose the route direction

via the Flying Speed Dial, Button A / B, Spray Button, Spray Speed Dial, Button C1 / C2.

[1] Flying Speed Dial

In Smart Operation Mode, turn and press the dial to adjust the flying speed. You can set four speed gears in the A2-

AG Assistant. The four speed gears are set to 3, 4, 5, 6 m/s by default, and the initial flying speed is the speed of the

first gear. Move the dial to the left and press the dial to change to the previous speed. Move the dial to the right

and press the dial to change to the next speed. The operation status display panel will indicate the current speed

gear.

The final movement of the dial before you press the dial will be used to set the flying speed.

[2] Button A

Press the button to record Point A of the Smart Operation route.

[3] Button B

Press the button to record Point B after Point A recorded.

[4] Spray Button

In Manual Operation Mode, press the button to start or stop spraying.

[5] Spray Speed Dial

In Manual Operation Mode, turn the dial to adjust the spray speed. Move the dial to the left to reduce the spray

speed. Move the dial to the right to increase the spray speed. The speed range is 40% - 100%*. The Operation Status

Display Panel will indicate the current spray speed. Refer to Operation Status Display Panel for detail. The spray

[1]

[2]

[5]

[4]

[3]

[6]

[7]

Charger

Power Outlet