User's Manual

AGRAS MG-1 User Manual
© 2016 DJI. All Rights Reserved. 25
GPS is not working, even if remote controller signal is lost or RTH button is triggered.
It is recommended to enter RTH by pressing and holding the RTH button rather than powering off the
remote controller in emergency situations.
Make sure there are no obstacles during RTH procedure and users are familiar with the methods to
regain control.
How to Regain Control
The table below shows ways to regain control in Failsafe RTH procedure. In Smart RTH procedure, the way to regain control
is the same as the part under “GPS” and “Attitude” Flight Mode in the table.
Flight Mode Switch
Flight Mode
GPS
Attitude
Manual
Regain Control
Toggle the Flight Mode Switch once to regain control
if the signal recovers.
Regain control as soon as
signal recovers.
Low Battery Level Warning
There are two types of warning for low battery level:
1. The first low battery level warning is triggered when the battery level is low. The Aircraft Status Indicator blinks
yellow. Fly the aircraft back and land it as soon as possible, then stop the motors and replace the batteries.
2. The second low battery level warning is triggered when the battery level is critically low. The Aircraft Status
Indicator blinks red. The aircraft will begin to descend and land automatically. If it is set to indicator warning only in
the A2-AG Assistant, the aircraft will not descend and land.
The threshold of the two low battery levels can be set in the A2-AG Assistant.