User's Manual
Table Of Contents
- Contents
- Installation
- Remote Controller
- Aircraft
- Flight
- Appendix
AGRAS MG-1 User Manual
© 2016 DJI. All Rights Reserved. 3
Installation
Mounting the Landing Gear
The structures of the two landing gear legs are different. The one with a compass cable should be
mounted to the right side of the aircraft (with its tail facing you).
1. Mounting the right landing gear leg
There is a compass cable in the landing gear leg. Connect the compass cable before mounting the landing gear leg.
①
Connect the compass cable to the compass port in the landing gear mount on the right side of the center frame.
Use tools such as tweezers if needed.
②
Mount the landing gear leg to the center frame. DO NOT damage the compass cable.
③
Insert and tighten M3x10 screws.
2. Follow the step 2 and 3 above to mount the left landing gear leg.
Aircraft’s Tail
Compass Cable
(For the right landing gear leg only)
Compass Port
Compass Cable
Hose Bracket