User's Manual
Table Of Contents
- Contents
- Installation
- Remote Controller
- Aircraft
- Flight
- Appendix
AGRAS MG-1 User Manual
© 2016 DJI. All Rights Reserved. 4
Mounting the Liquid Tank
1. Insert the four liquid tank plugs into the mounting holes on the liquid tank.
2. Hold up the liquid tank to the lower position of the center frame with the liquid pump facing the aircraft’s tail.
3. Align the mounting holes on the liquid tank and landing gear. Tighten the four M5x18 screws on the two sides.
4. Align the fin on the motor cable connector and the slot on the motor port. Then plug the motor cable.
Battery Mounting Position
Battery Lock
Mounting Holes
Liquid Pump
Fittings
Motor Cable