User's Manual

© 2017 DJI All Rights Reserved. 9
Aircraft
Flight Modes
The MG-1S provides P-mode, A-mode and F-mode. Switch to one of the three modes via the
Flight Mode Switch on the remote controller.
P-mode (Positioning)
The aircraft uses GPS for positioning. In P-mode, toggle the Operation Mode Switch to select from
the three operation modes. When the GPS signal is strong, users can start the motors.
A-mode (Attitude)
GPS is NOT used for positioning and aircraft can only maintain altitude using the barometer.
Aircraft can still record its position and return to the Home Point if a GPS signal is present.
F-mode (Function)
Enter Course Plan Mode to plan operation mission in the DJI MG-1S app and then the aircraft will
operate automatically.
Operation Modes
The MG-1S provides Smart Operation Mode, Manual Operation Mode and Manual Plus Operation
Mode. Switch to one of the three modes via the Operation Mode Switch on the remote controller.
Smart Operation Mode
In Smart Operation Mode, the aircraft will travel along a pre-planned route. Operation resumption,
data protection, and terrain follow system are available in this mode. Use the Flying Speed Dial on
the remote controller to adjust flying speed, spray rates will automatically adjust accordingly.
Smart Operation Mode is recommended for large, rectangular spray areas.
Operation Route
The aircraft will travel along pre-designated square zig zag route after the turning points A and B
have been recorded. The altitude difference between the aircraft and vegetation is maintained
under optimal working conditions. The aircraft will spray liquid automatically while flying along
the route and stop spraying liquid while hovering at the turning points. The length of the dotted
lines, which are called Operation Gaps, can be adjusted in the app.