User's Manual

Usage
Charging the Battery
Checking the Battery Level
Press the Battery Level Button once to check the battery level, and press again to power off.
Charging
Install the battery into the standard charging hub, and connect the plug the connector B of the battery
charger to the charging hub, then connect the battery charger to a power outlet (100-240V, 50/60Hz).
.
Tips: The charging hub can charge two batteries at the same time. It will take a longer time to charge the Intelligent Flight
Battery and remote controller together.
Mounting the Battery
Put the battery into the Battery Slot, then push it to the end until you hear a click.
Note: Ensure to press the Battery Remove Button before remove the battery.
Low
High