User's Manual

Mounting the Motor
The following steps show how to mount the motor to camera support rods. The motor comes with
rod clamp with two inner diameters.
1. Loosen the knob on the quick-release mount and attach the motor to the rod, and adjust the
quick-released mount on the motor so that the gear can make full contact with the lens.
2. Press the gear firmly against the lens and tighten the knob. Ensure the motor gear and the lens
ring make good contact.
3. Connect the power port on the motor to an external power supply by using the provided power
cable. For example, if you are using the camera mounted on the Ronin-M, connect the motor to
the P-TAP accessories power port on the Ronin-M.