User Manual
Compliance Information KCC Warning Message “해당무선설비는 운용 중 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다.” “해당 무선설비는 운용 중 전파혼신 가능성이 있음” In the Box Check that all of the following items have been included in your package before use. If anything is missing, please contact your local dealer. Index Name Picture Qty.
Introduction DJI Inspire 1 package includes aircraft, C1, gimbal, camera and DJI App. Flight control system is inside the aircraft, the built‐in camera has been integrated with gimbal. C1 and DJI App are used to control the aircraft, gimbal and camera. The HD video downlink and receiver have been integrated in the aircraft, which is used for HD video transmitter and control the aircraft.
Aircraft [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] GL658A [1] Antenna A [2] Mounting M Po osition [3] Stick S [4] Neck N Strap Attachment A [5] RTH R Button [6] Transformati T ion Switch [7] Battery B Leveel LEDs [8] Status S LED [9] Power P Button n [10] Camera Setttings Dial [11] Playback Bu utton Built‐in GPS G Propellerr Motor ED Front LE Landing gear Frame arrm Gimbal DJI Smarrt Battery Micro‐US SB Port Rear LED D Camera Micro‐USB M P Port Camera Micro‐SD M Card Port Hover asssistant c
[12] Shutter Button [13] Flight Mode Switch [14] Video Recording Button [15] Gimbal Dial [16] HDMI Port [17] Upgrade Port [18] CAN Port [19] USB Port [20] Handle Bar [21] Reserved Button [22] Power Source Port [23] Reserved Button Start 1. Watch the tutorial video Scan the QR code or click the link shown below to watch the tutorial video. Tutorial video http://www.dji.com/Inspire1/training 2. Download DJI App Search ʺDJI” on the App Store then follow instructions for iOS version.
DJI App There are four page of GUI: Camera, ground station, tool box and user center.
Camera GUI: For display the real time HD images and aircraft data, enable shutter and video recording. Ground Station: For display the map for setting flight mission. User Center: photograph and video synchronization, flight record, DJI Shop and account information. Preparing DJI Inspire 1 1. Mounting the Gimbal Step 1：Remove the Gimbal Cover and the Gimbal Clamp from the gimbal.
Step 3: Insert the gimbal into the Gimbal Lock. Ensure the white mark on the gimbal is aligned with the white mark on the left of the Gimbal Lock. Refer to the picture below for details: Step 4: With the gimbal in place, turn the Gimbal Lock to the left (when you are facing the nose of the DJI Inspire 1) until it locks in the position shown in the below. Now the gimbal is secured: 2.
3. Description of Aircraft Port （See the location on P） Micro‐USB Port: For connecting aircraft and PC Assistant to upgrade firmware. Camera Micro‐ USB Port: For connecting aircraft and PC to output the data to PC. Camera Micro‐SD Card Port: For placing the SD card. 4. Powering On Smart Flight Battery Press the circular power button once, then press again and hold for 2 seconds to power on the smart flight battery. (Repeat the above steps to power off the smart battery.
Playback Button: Press to view the images or videos that have already been captured. Recording Button: Press once to start recording video, then press again to stop recording. Flight Mode Switch: Toggle the switch to select the desired flight mode. You may choose between; GPS mode, OPTI mode and ATTI mode. Position 1：GPS mode Position 2：OPTI mode Position 3：ATTI mode Transformation Switch: This switch has two positions.
