Ronin-M User Manual V1.0 2015.
Disclaimers and Warnings Congratulations on purchasing your new DJI product. Please read this manual and disclaimer carefully before using this product. By using this product, you hereby agree to this disclaimer and signify that you have read it fully. You agree that you are responsible for your own conduct and any content created while using this product, and for any consequence thereof.
Ronin-M User Manual Usage and Storage 1. 2. 3. 4. 5. 6. 7. 8. Keep batteries out of the reach of children and pets. Never discharge batteries below 3V per cell. Do not heat the battery. Do not insert or remove batteries if the plastic cover has been torn or compromised in any way. Do not drop or strike batteries. Never use a swollen, leaky or damaged battery. Clean battery terminals with a clean, dry cloth. Do not expose batteries to extreme temperatures, including excessive heat.
Ronin-M User Manual Using this manual Important Hints and Tips References or Definitions Download DJI Ronin-M Assistant App Download and install the DJI Ronin-M Assistant App. Search "DJI Assistant" on the App Store and then follow the instructions for iOS installation. Search "DJI Ronin" on the Google Play and then follow the instructions for Android installation. iOS6.1 or above 4 Android4.3 or above © 2015 DJI. All Rights Reserved. http://m.dji.
Contents Disclaimers and Warnings Using Lithium Polymer (LiPo) Batteries Usage and Storage Battery Disposal FCC Compliance Using this manual Download DJI Ronin-M Assistant App Introduction In the Box Gimbal Description Getting Started Intelligent Battery Tuning Stand Installing the Handle Bar onto the Gimbal Intelligent Battery Installation Mounting the Camera Handle Bar Adjustment Balancing Step 1: Balancing the Vertical Tilt Step 2: Balancing the Roll Axis Step 3: Balancing the Tilt Axis Step 4: Bala
Introduction Developed for the filmmaking professional, the DJI Ronin-M marks a generational leap in camera stabilization technology. The technology built into the DJI Ronin-M allows a broad spectrum of cameras varying in size and weight to be mounted for class leading stabilization. Based on the successful design of DJI Ronin Hand-held Gimbal, Ronin-M is lighter, smaller and more convenience to shooting. A brushless gimbal stabilization system is not simply three brushless motors moving on three axes.
Ronin-M User Manual Charger ×1 110-240V automatic switching charger. Intelligent Battery ×1 Power source for the gimbal. Also supplies power for other external devices. Cables ×1 ANSI cable, JIS cable or CE cable (according to your region). Plug Adaptors ×2 SAA & BS adaptors. Micro-USB Cable×1 For firmware upgrades. Camera Mounting Plate ×1 For mounting your camera onto the gimbal.
Gimbal Description [1] [2] [3] [5] [4] [6] [7] [8] [9] [10] [11] [13] [16] [12] [14] [15] [17] [18] [19] [20] [21] [1] Top Handle Bar [2] Side Handle [3] Quick Release Mount [4] Pan Motor [5] Pan Adjustment Slider [6] D-BUS/PPM Receiver Port [7] USB Port & CAN Bus Port [8] Bind Button [9] Gimbal LED Indicator Light [10] Smart Battery [11] Roll Motor [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] Tilt Motor Fore and Aft Adjustment Tilt Vertical Adjustment Roll Adjustment IMU Port P-TAP Acces
Ronin-M User Manual DJI Intelligent Battery Functions Balance Charging Automatically balances the voltage of each battery cell during charging. Capacity Display Displays current battery levels. Overcharge Protection Charging stops automatically when the battery voltage reaches 16.8V to prevent overcharge damage. Over Discharge Protection Discharging stops automatically when battery voltage reaches 12V to prevent over discharge damage.
Ronin-M User Manual Using the Intelligent Battery [1] [3] [2] [1] Battery Level Indicators [2] Power Button (with one LED battery power indicator.) [3] Thumb Screws Checking the battery level: When the battery is powered off, pressing the battery power button once will display the current battery level. Powering on: When the battery is powered off, press and hold for 1 second to turn on the smart battery.
Ronin-M User Manual Installing the Handle Bar onto the Gimbal 1. The turn knobs on the handles are loose by default. Adjust the grips to the desired position and tighten the screws to secure their position. 2. Place the handle bar in the position as shown below, then slide the handle bar into the gimbal, tighten the lock-knob. 3. With your hands on the handles, be sure the gimbal is not obstructed during a 360 degree pan. Installation is complete. Intelligent Battery Installation 1.
Ronin-M User Manual Make sure the battery is powered off during the installation. An incorrectly installed battery may lead to (1) Poor battery connection, or (2) Unavailable battery information. Mounting the Camera The Ronin-M uses an adjustable camera mounting plate to allow you to easily balance, install and remove your camera. The Ronin-M has been tested with the following types of cameras.
