Mavic Mini Quick Start Guide V1.0 2019.07 Aircraft Mavic Minifeatures Obstacle Sensing and Infrared Sensing System*, and a fully stabilized 3-axis gimbal with a 1/2.3” CMOS sensor camera that shoots 2.7K video and 12-megapixel photos. 1. 2. 3. 4. 5. 6. 7.
8. 9. 10. 11. 12. Antennas Battery Cover Charging/Upgrading Port (Micro USB) microSD Card Slot Aircraft Status Indicator *The Vision Systems and Infrared Sensing Systems are affected by surrounding conditions. Read the Disclaimer and Safety Guidelines and watch the tutorial in the DJI XX app or on the official DJI website to learn more.http://www.dji.com/mavic-mini Remote Controller Built into the remote controller is the DJI enhanced Wi-Fi technology, offering a maximum transmission range of 2.
Download the DJI XX App and Watching Tutorial Videos Search “DJI XX” in the App Store or Google Play or scan the QR code below to download the app on your mobile device. Watch the tutorial videos at www.dji.com/mavic-mini or in DJI XX by tapping the icon in the top right corner of your screen. DJI XXis compatible with iOS 10.0 (or later) or Android 5.0 (or later). Charging the Batteries Use the provided charger to fully charge the Intelligent Flight Battery before first use.
Press once to check the battery level. Press, then press and hold to turn on/off. Preparing the Aircraft 1. Remove the gimbal cover from the camera. 2. Unfold the front arms and the propellers. 3. Unfold the rear arms and the propellers. 4. Unfolded Unfold the front arms and the propellers before the rear ones. All arms and propellers must be unfolded before takeoff.
Preparing the Remote Controller 1. Unfold the antennas and mobile device clamps, then attach the control sticks. 2. Place one end of the RC cable to the end of the slot. 3. Attach your mobile device within the clamps. Ensure the control sticks are firmly mounted. The remote controller cable with the Lightning connector is mounted by default. Use the appropriate cable for your mobile device to connect to the remote controller.
Preparing for Takeoff 1. Power on the remote controlle 2. Power on the aircraft 3. LaunchDJI XX App Flight Before taking off, make sure the Aircraft Status Bar in DJI XX displays “Ready to Go.
Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to the Home Point, you should guide it with the control sticks. Specifications • Aircraft Weight 249 g Max Flight Time 30 minutes (0 wind while flying at a consistent 15.5 mph (25 kph)) Operating Temperature 32°F to 104°F (0°C to 40°C) Operating Frequency Model MT1SS5: 5.725-5.850 GHz Model MT1SD25: 2.4-2.4835 GHz; 5.725-5.850 GHz Transmitter Power (EIRP) Model MT1SS5 5.
Aperture: f/2.8 Focus: 1 m to ∞ ISO Range Video: 100-3200 Photo: 100-1600 (auto);100-3200 (manual) Electronic Shutter Speed 8-1/8000 s • Remote Controller Operating Frequency Model MR1SS5: 5.725-5.850 GHz Model MR1SD25: 2.4-2.4835 GHz; 5.725-5.850 GHz Battery 2600 mAh Transmitter Power (EIRP) Model MR1SS5 5.8 GHz: <30 dBm (FCC); <28 dBm (SRRC) Model MR1SD25 2.4 GHz: <19 dBm (MIC/CE) 5.8 GHz: <14 dBm (CE) Operating Voltage • 1200mA @ 3.6V (Android) 700mA @ 3.
that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Cet équipement a été testé et déclaré conforme aux limites imposées aux appareils numériques de classe B, conformément à la section 15 du règlement de la FCC. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet équipement génère, utilise et peut émettre de l'énergie de fréquence radio. S'il n'est pas installé et utilisé conformément aux instructions, il peut causer des interférences nuisibles aux communications radio.
et certifié conforme par la FCC / ISEDC qu'il ne dépasse pas la limite d'exposition fixée par la FCC / ISEDC. Les tests de chaque produit sont réalisés à des emplacements et dans des emplacements appropriés. par la FCC / ISEDC. Pour un usage sur le corps, cet appareil a été testé et respecte les directives d'exposition RF de la FCC / ISEDC lorsqu'il est utilisé avec un accessoire conçu pour ce produit ou avec un accessoire ne contenant pas de métal et positionnant le combiné à 10 mm minimum du corps.
