PHANTOM 2 VISION+ User Manual
PHANTOM 2 VISION+User Manual V1.0 February 14, 2014 Revised Congratulations on purchasing your new DJI product. Please thoroughly read the entire contents of this manual to fully use and understand the product. It is advised that you regularly check the PHANTOM 2 VISION+’s product pageat www.dji.comwhich is updated on a regular basis. This will provide services such as product information, technical updates and manual corrections.
Before Use Disclaimer &Warning Please read this disclaimer carefully before using this product. This product is not suitable for people under age of 18. By using this product, you hereby agree to this disclaimer and signify that you have read them fully. You agree that you are responsible for your own conduct and content while using this product, and for any consequence thereof.
8. 9. 10. damaged parts. Do not use in the magnetic interference area, radio interference area. This will lead to communication or other failures. Do not use in the server weather condition such as rainy day, snow, windy (more than moderated breeze), hail, lighting, tornadoes and hurricanes etc. Before flying, please read all instruction on the quick start guide and detail user guide and other useful information included in the package or the official website. Cautions for Airborne Camera Use 1.
10. Do not clean the charger with a solvent denatured alcohol or other flammable solvents. Usage and Storage Keep the batteries out of the reach of children and pets. Never discharge batteries below 3V per cell. Do not heat the battery. Do not insert or remove the batteries if the plastic cover had been torn or compromised in any way. Do not insert or remove the batteries in the charger or the craft while the power is on. Do not expose the batteries to excessive physical shock.
Always use DJI approved battery. Always use DJI approved charger to recharge the flight battery. Limitation of Liability DJI accepts no liability for damage(s) or injuries incurred directly or indirectly from the use of this product in the following conditions: 1. 2. 3. 4. 5. Damage(s) or injuries incurred when users are drunk, taking drugs, drug anesthesia, dizziness, fatigue, nausea and any other conditions no matter physically or mentally that could impair your ability.
18. 19. 20. detail user guide and other useful information included in the package or the officialwebsite. Operators do no obey the local law or regulation. Other losses that are not covered by the scope of DJI liability. Other losses that are not covered by the scope of DJI Innovations liability Warning 1. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This product complies with Part 15 of the FCC rules.
a) Defame, abuse, harass, stalk, threaten or otherwiseviolate the legal rights (such as right of privacy b) Photograph people or their privacy area without their consent or photograph any non-photograph and publicity) of others; area with the prior authorizations; c) Use this product for any illegal or inappropriate purpose other than general personal use (such as d) Violate or disregard any other applicable local laws, administrative rules and social habits.
and you can obtain the most comprehensive details in PHANTOM 2 VISION+ MANUAL. For experienced users, especially who controls DJI PHANTOM 2 VISION well; you can refer to PHANTOM PILOT TRAINING GUIDE to take off your aircraft quickly as well. WatchingTutorial Videos This user manual contains detailed installation and usage procedures of the product. In addition to this manual, we provide a range of quick start videos. It is advised that you watch them fully before attempting to use the product.
Table of Contents BEFORE USE .......................................................................................................................................................................................................... 2 DISCLAIMER & WARNING ................................................................................................................................................................................ 2 INSTRUCTIONS .................................................................
3.1 INTRODUCTION ........................................................................................................................................................................................... 22 3.2 BUILT-IN FLIGHT CONTROL SYSTEM INSTRUCTIONS ............................................................................................................................. 22 Assistant Software Port.......................................................................................................
[2] Login ...................................................................................................................................................................................................... 42 [3] Usage tips ............................................................................................................................................................................................. 42 8 CONNECTING THE CAMERA ...................................................................
[3] VIDEO RESOLUTION.................................................................................................................................................................................... 59 [4] PHOTO FORMAT .......................................................................................................................................................................................... 60 [5] SELECTABLE ISO...................................................................................
3 TROUBLESHOOTING（FAQ） ................................................................................................................................................................... 78 Overview PHANTOM 2 VISION+ is an excellent flight platform and it is an upgrade version of PHANTOM 2 VISION, upgrading to a flying video camera from a flying camera.
5 6 7 8 9 10 11 12 13 14 15 16 Lens Cap Gimbal Clamp Micro-SD Card Charger Mounted in the aircraft 1 Mounted in the aircraft 1 Mounted in the aircraft 1 Power Cables Plug Set Micro-USB 1 GB&CE 1 SAA&ANSI 1 Cable Propeller Detaching 1 Wrench Spared Damping 4 Absorbers Spared 11 Screws Stickers 1 Manuals ©2014 DJI Innovations. All Rights Reserved.
17 MANUAL》 AA 4 Batteries 2 Introduction Supply power for the remote controller The complete package of PHANTOM 2 VISION+ consists of aircraft, camera, gimbal, propulsion system, flight control system, remote control system and Wi-Fi communicating system. The flight control system is integrated within the aircraft. The remote control system operates at 5.8GHz band and the receiver is built-in the aircraft too. The built-in Wi-Fi module and range extender comprisethe 2.
3 Quick Start Guide 1. Watch tutorial videos and read manuals. 3. Remove gimbal clamp. 2. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Open the box and check. Prepare remote controller batteries, and get intelligent battery, range extender and mobile device charged. Download DJI VISION App via your mobile device, register and login. Install Micro-SD card and attach propellers to aircraft. Install remote controller batteries.
Assemblies and Usages Please adhere to following assemblies and usages to prepare for flight. 1 Removing the Gimbal Clamp Do remove the gimbal clamp prior to the assembly. As the figure below to pull out the clamp along the unlock direction. Figure 2 Do not power on the aircraft when the gimbal clamp is attached, otherwise may damage the gimbal. Please attach the gimbal clamp to protect the gimbal and camera during delivery or long time preservation.
Intelligent B attery DJI Intelligent Battery Functions （1） Balance Charging （2） Capacity Display C harger Automatically balance the voltage of each battery cell during charging. Display the current batterylevel. The main controller communicateswith the battery via communication （3） Communicating （4） Overcharging Protection （5） Over Discharging Protection （6） Short Circuit Protection ports for battery voltage, capacity, current and other information.
seconds to turn on the intelligent battery. The battery power indicator will be solid red and the battery level indicator will indicate current battery capacity level after power on. Powering off: When the battery is powered on, press the battery power button once and then press and hold for 2 seconds to turn off the intelligent battery. The LED indicators all go out after power off.
40%~50% 30%~40% 20%~30% Less than 20% More battery information is available in the battery tab of the PHANTOM 2 VISION+Assistant Software. 2.3 Charging the Intelligent Battery 1. Connect the charger to a wall socket (Use the plug set if necessary). 2. Connect the battery to the charger. If the current capacity of the battery is over 75%, you should power on the battery to begin charging. 3. The Battery Level indicators display current capacity level as the battery charges.
An incorrectly installed battery may cause one of the following to occur: (1) Bad contact. (2) Unavailable battery information. (3) Unsafe for flight. (4) Unable to take off. 2.5 Correct Battery Usage Notes 1. Never plug or unplug the battery into the aircraft when it is powered on. 2. The battery should be charged in an environment that is between 0℃ to 40℃, and be discharged in an environment that is between -20 ℃ to 50 ℃ .
3Preparing PHANTOM 2 VISION+ Aircraft PHANTOM 2 VISION+ aircraft is a quadrotor with built-in flight control system and has integrated with gimbal and camera, it also has a Micro-USB port on the aircraft for connecting to Assistant Software and anotherMicro-USB port on the gimbal for connectingMicro-SD cardof camera. The aircraft has battery compartment specialized for the intelligent battery, it also has LED flight indicators for status indicating.
Modules Main controller IMU GPS& Compass LED Indicators Functions Acts as the brains of the complete flight control system responsible for connecting and controlling all the modules together. Has a built-in inertial sensor and a barometric altimeter that measures both attitude and altitude. The compass reads geomagnetic information which assists the GPS (Global Position System) to accurately calculate the position and height of the aircraft in order to implement the stable hovering function.
Normal status LED flight indicators Power On Self-Test Warming Up ---- Aircraft cannot take off. Ready to Fly Slow blinking green. Ready to Fly (non-GPS) Abnormal status LED flight indicators Remote Controller Signal Lost 1st Notes Level Low Battery Capacity Warning 2ndLevel Low Battery Capacity Warning Not Stationary or Sensor Bias is too big Error* Slow blinking yellow. Fast blinking yellow. Refer to . Slow blinking red. Fast blinking red. Keep performIMU calibration.
Resolution 14 Megapixels Sensor size 1/2.3” FOV 140°/ 120° / 90° Removing the camera lens cap Remove the lens cap before usingthe camera. Put the lens cap back on when you finish using the camera. Camera function button Capture function: Press the button once(hold less than 2 seconds)to take a single capture. Record function: Press the button once(hold no less than 2 seconds) to begin recording.Press once again to stop.
(0.2s green, 1.8s yellow) Recording ON/OFF CMOS sensor error ON/OFF Solid Slow Blink (0.2s on, 1.8s off) ON/OFF Blink Once(0.2s on, 0.3s off) ON/OFF Blink 3 Times(0.1s on, 0.1s off) Fast Blink(0.1s on, 0.3s off) Off) ON (0.5s green, 0.5s yellow, 0.5s red, 0.5s ON/OFF ON/OFF Critical error Operation failed Micro-SD card error Upgrade error Overheated Camera 3.
Below two cases may cause the gimbal motor error. 1) Forget removing the gimbal clamp: make sure the clamp is removed before power on the aircraft. 2) The gimbal receives excessiveexternal force(collision or artificial reason): please take care of the gimbal after power on. ©2014 DJI Innovations. All Rights Reserved.
4 Attaching the Propellers Please use the original 9-inch propellers which are classified by the color of each central nut. Damaged propellers can be replaced by purchasing new ones if necessary. 4.1 Introduction Propellers Diagram Assembly Location Fastening/Un-fastening Grey Nut (9443) Black Nut (9443 R) Attach to the motor thread that does Attach to the motor thread that has not havea black dot. Instructions ablack dot. Lock: Tighten the propeller in this direction.
Fig.3 4.4 Notes 1. Check that the propellers and motors are installed correctly and firmly before every flight. 2. Ensure that all propellers are in good condition before each flight. DO NOT use any ageing, chipped, or broken propellers. 3. To avoid injury, STAND CLEAR ofand DO NOT touch the propellers ormotors when they are spinning. 4. ONLY use original DJI propellers for a better and safer flight experience. ©2014 DJI Innovations. All Rights Reserved.
