Quick Start Guide

* If any obstacles are in the operation area.
Once you have finished planning, tap in the upper left corner of the screen to return to the main screen.
● Operate the aircraft carefully when flying near obstacles to avoid a collision.
● Calibration points are used to rectify flight route biases caused by GNSS positioning deviations. Choose one or more fixed
reference points for calibration like a metal peg or obvious marker that are easy to identify for bias rectification when using
the plan.
Performing an Operation
Power on the remote
controller, followed by the
aircraft
Tap Plan a Field > Fly the
aircraft
The app will display Manual
Route (GNSS) or Manual
Route (RTK)
Tap Start Measuring
Fly the aircraft alongside the
boundary of the operation
area and tap Add Waypoint
at turning points.
Fly near each obstacle * in turn
and tap Start Obstacle
Measurement.
Fly the aircraft around the
obstacle and tap Add
Waypoint at several points
around the obstacle. *
Tap End Obstacle
Measurement. *
Fly to the location of each
calibration point and tap Add
Calibration Point.
Tap End Measurement.
Adjust the flight route: route
angle, line spacing, and collision
avoidance safety margin.
Save the field plan.