Quick Start Guide

● Only take off in open areas, and set an appropriate auto-takeoff height according to the operating environment.
● An operation can be paused by toggling the Pause switch. The aircraft will hover and record the breakpoint, and then the
aircraft can be controlled manually. To continue the operation, select it again from the Executing tag in list, and the
aircraft will return to the breakpoint automatically and resume the operation. Pay attention to aircraft safety when returning
to the breakpoint.
●
In Route Operation mode, the aircraft is able to circumvent obstacles, which is disabled by default and can be enabled in
the app. If the function is enabled, the aircraft will plan a flight path, slow down, and fly across the obstacles after the radar
detects the obstacles, then return to the operation path to resume the operation.
● The aircraft will hover at the endpoint of the flight route after the operation is completed. Instead of hovering, the aircraft
can also be set to perform other actions in the app.
More Operation Modes
Refer to the user manual for more information about the A-B Route, Manual, and Manual Plus Operation modes.
More Functions
Operation Resumption System Data Protection Empty Tank Warning
Refer to the user manual for more information.
6. Maintenance
Clean all parts of the aircraft daily, immediately after spraying:
A. Completely fill the spray tank with clean water or soapy water and spray the water through the nozzle until the tank
is empty. Repeat the step two more times.
B. Detach the spray tank to clean it. Remove the spray tank strainer, nozzle strainers, and nozzles to clean them and clear
Take the aircraft to
one of the calibration
points.
Tap Execute Operation in the
main screen of the app.
Tap , select the field from the field
list, and select Invoke.
Adjust the flight route: route
angle, line spacing, and collision
avoidance safety margin.
Tap Rectify Offset.
Tap Start.
Set the operation parameters,
then confirm.
Set the auto-takeoff height, move the slider
to take off and perform the operation
automatically.