Quick Start Guide

Place the battery into the charging hub, connect the AC power adapter to the charging hub, and then connect the AC
power adapter to a power outlet (100-240 V, 50/60 Hz).
Charging Hub AC Power Adapter Power Outlet
Mounting the Battery
The remote controller uses an easily removable, interchangeable
Intelligent Battery for long-term operation.
① Slide the battery compartment cover lock on the back of the remote
controller down to open the cover.
② Insert the Intelligent Battery into the compartment and push it to the
top.
③ Close the cover.
● To remove the Intelligent Battery, open the cover, press and hold the battery release button, then push the battery
downward.
Mounting the Dongle and SIM Card
● Only use a DJI-approved dongle.
● The dongle supports various network standards. Use a SIM card that is compatible with the chosen mobile network
provider, and select a mobile data plan according to the planned level of usage.
● The dongle and SIM card are used to enable the remote controller to access to specific networks and platforms, such as
the DJI AG platform. Be sure to employ them correctly, or else network access will not be available.
Battery Release
Button
Lift the dongle compartment cover at the gap at its lower right corner, then
remove it.
Insert the dongle into the USB port with the SIM card inserted into the dongle and
test it. *
Reattach the cover. To secure the cover, open the silicone protectors on it, insert
and tighten two Phillips screws, then close the protectors.
Dongle