Quick Start Guide

Optimal Transmission Zone
Try to keep the aircraft inside the optimal transmission zone. If the signal is weak, adjust the antennas or fly the aircraft
closer.
● Avoid using wireless devices that use the same frequency bands as the remote controller.
4. Getting Ready for Takeoff
A. Place the aircraft on open, flat ground with the Aircraft Status Indicators facing toward you.
B. Make sure that the propellers are securely mounted, there are no foreign objects in or on the motors and propellers,
the propeller blades and arms are unfolded, and the arm sleeves are firmly tightened.
C. Make sure that the spray tank and flight battery are firmly in place.
D. Pour liquid into the spray tank, and tighten the cover. Make sure that the four fins on the cover are in horizontal or
vertical positions respectively.
E. Power on the remote controller, make sure that the DJI MG app is open, and then power on the aircraft.
When using for the first time, activate it using the DJI MG app. Your DJI account and an Internet connection
are required.
Calibrating the Spraying System
Make sure to calibrate the spraying system before your first operation, or else it will adversely affect the spraying
performance.
A. Preparation before calibration: If there are any bubbles in the hoses, discharge them before calibrating. If there are no