User's Manual Part 1

40%~50%

30%~40%

20%~30%

Less than 20%

More battery information is available in the battery tab of the PHANTOM 2 VISION+Assistant

Software.

2.3 Charging the Intelligent Battery

Connect the charger to a wall socket (Use the plug set if necessary).

2. Connect the battery to the charger. If the current capacity of the battery is over 75%, you should power on

the battery to begin charging.

3. The Battery Level indicators display current capacity level as the battery charges. Please refer to battery

level indicator description for details.

4. The battery is fully charged when the Battery Level indicator lights are off. Please disconnect the charger

and battery when the charging is completed.

Socket

Charging process

LED1

LED2

LED3

LED4

Current battery level

0%~25%

25%~50%

50%~75%

75%~100%

Fully charged

If current battery level is over 75%, the battery should be powered on to charge.

2.4Install the Battery

Push the battery into the battery compartment correctly as the following diagram shows. Make sure to s l i de the

battery into the compartment until you hear a ‘click’ sound to confirm the battery is installed correctly