Camera and Gimbal Th i s s e c t i o n p rov i d e s t h e t e c h n i c a l specifications of the camera and explains the gimbal’s operation modes. 30 © 2015 DJI. All Rights Reserved.
Camera and Gimbal Camera Profile The on-board camera uses the 1/2.3 inch CMOS sensor to capture video (up to 30fps with the Phantom 3 Standard) and 12 megapixel stills. You may choose to record the video in either MOV or MP4 format. Available picture shooting modes include burst, continuous, and time-lapse mode. A live preview of what the camera sees can be monitored on the WiFi connected mobile device via the DJI Pilot app.
Phantom 3 Standard User Manual Camera Operation Use the Shutter and Video Recording buttons on the remote controller to shoot the images or videos through the DJI Pilot app. For more information about how to use these buttons, refer to “Controlling the Camera Page 24”. Gimbal Gimbal Profile The 3-axis gimbal provides a steady platform for the attached camera, allowing you to capture clear, stable images and video. The gimbal can tilt the camera within a 120˚ range.
Phantom 3 Standard User Manual Anti-Drop Kit The anti-drop kit helps keep the gimbal and camera connected to the aircraft. Two pins have been mounted prior to shipping. If new or additional pins are required, see the diagram below. Press Part ① through the hole of the vibration absorber and into the center hole of Part ② , then lock them together as shown ③ . Mounting the anti-drop kit pins diagonally from each other is recommended. ① ③ ② Gimbal Camera © 2015 DJI. All Rights Reserved.
DJI Pilot App This section introduces the four main functions of the DJI Pilot app. 34 © 2015 DJI. All Rights Reserved.
DJI Pilot App The DJI Pilot app is a mobile application designed specifically for the Phantom 3 series. Use this app to control the gimbal, camera, and other aircraft functions. The app also features Map, Academy, and User Center, which are used for configuring your aircraft and sharing your photos and videos with others. It is recommended that you use a tablet for the best experience.
Phantom 3 Standard User Manual [1] Flight Mode : The text next to this icon indicates the current flight mode. Tap to configure the MC (Main Controller) Settings. These settings allow you to modify flight limits and set the gain values. [2] GPS Signal Strength : This icon shows the current strength of GPS signals. Green bars indicate adequate GPS strength. [3] IOC Settings CL : This icon displays the IOC setting when the aircraft has entered F-mode.
Phantom 3 Standard User Manual Record : Tap once to start recording video, then tap again to stop recording. You can also press the Video Recording Button on the remote controller, which has the same functionality. Playback : Tap to enter the playback page. You can preview photos and videos as soon as they are captured. Camera Settings : Tap to set ISO, shutter and auto exposure values of the camera.
Phantom 3 Standard User Manual [16] Livestream : Livestream icon indicates the current video feed is broadcasting live on YouTube. Be sure the mobile data service is available on the mobile device. [17] Back : Tap to return to the main GUI. Director Director is an automatic video editor built into the DJI Pilot app. After recording several video clips, simply tap “Director” from the app’s home screen.
Flight This section describes safe flight practices and flight restrictions. © 2015 DJI. All Rights Reserved.
Flight Once pre-flight preparation is complete, it is recommended that you use the flight simulator in the DJI Pilot app to hone your flight skills and practice flying safely. Ensure that all flights are carried out in an open area. Flight Environment Requirements Flight 1. Do not use the aircraft in severe weather conditions. These include wind speeds exceeding 10 m/s , snow, rain and fog. 2. Only fly in open areas.
Phantom 3 Standard User Manual GPS Signal Strong Blinking Green Flight Limits DJI Pilot app Aircraft Status Indicator Maximum Flight Altitude Aircraft's altitude cannot exceed the specified value. Warning: Height limit reached. None. Max Radius Flight distance must be within the max radius. Warning: Distance limit reached. Rapid red flashing when close to the max radius limit.
Phantom 3 Standard User Manual 1640 feet 66 feet 1 mile R1 R2 320 feet 1640 feet 66 feet 1 mile 320 feet R1 R2 Restricted Area Flight (1) Restricted Areas does not have flight altitude restrictions. (2) R miles around the designated restriction area is a Take-off Restricted area. Aircraft cannot take off within this zone. The value of R varies based on the definition of the restricted areas. (3) A “warning zone” has been set around the Restricted Area. When the aircraft approaches within 0.
Phantom 3 Standard User Manual GPS Signal Strong Zone No-fly Zone Warning zone Free zone Aircraft Status Indicator Restriction DJI Pilot App Prompt Motors will not start. Warning: You are in a No -fly zone. Take off prohibited. If the aircraft enters the restricted area in A-mode, but is switched to P-mode, the aircraft will automatically descend, land, and stop its motors. Warning: You are in a no-fly zone. Automatic landing has begun.
Phantom 3 Standard User Manual Preflight Checklist 1. 2. 3. 4. 5. 6. Remote controller, Intelligent Flight Battery, and mobile device are fully charged. Propellers are mounted correctly and firmly. Micro-SD card has been inserted, if necessary. Gimbal is functioning normally. Motors can start and are functioning normally. The DJI Pilot app is successfully connected to the aircraft. Calibrating the Compass IMPORTANT: Always calibrate the compass in every new flight location.
Phantom 3 Standard User Manual 3. Hold the aircraft vertically, with nose pointing downward, and rotate it 360 degrees around the center axis. Recalibrate the compass if the Aircraft Status Indicator glows solid red. Flight If the Aircraft Status Indicator blinks red and yellow after the calibration procedure, move your aircraft to a different location and try again. Calibrate the compass before each flight. Launch the DJI Pilot app and follow the on-screen instructions to calibrate the compass.
Phantom 3 Standard User Manual Auto-Landing Use auto-landing only if the Aircraft Status Indicators are blinking green. Follow the steps below to use the auto-landing feature: 1. Ensure the aircraft is in P- mode. 2. Check the landing area condition before tapping “ ”, to begin landing. Then follow the on-screen instructions. Starting/Stopping the Motors Starting the Motors A Combination Stick Command (CSC) is used to start the motors.
Phantom 3 Standard User Manual When the Aircraft Status Indicators blink yellow rapidly during flight, the aircraft has entered Failsafe mode. A low battery level warning is indicated by the Aircraft Status Indicators blinking red slowly or rapidly during flight. Watch our video tutorials for more flight information. Video Suggestions and Tips 1. Go through the full pre-flight checklist before each flight. 2. Select the desired gimbal operation mode in the DJI Pilot app. 3.
FAQ 48 © 2015 DJI. All Rights Reserved.
Troubleshooting (FAQ) Can I remove the camera and attach my own? No. The cameras that come with both models are permanently attached. Attempting to remove, replace, or modify the camera may damage the product and will void your warranty. Can I charge my Remote Controller and Intelligent Flight Battery at the same time? While the Remote Controller charger and Intelligent Flight Battery charger have been integrated into one unit for your convenience, it is recommended that you only charge one item at a time.
Phantom 3 Standard User Manual How do I use the Director automatic video editor? Director is an automatic video editor built into the DJI Pilot app. After recording several video clips, simply tap “Director” from the app’s home screen. You can then select a template and a specified number of clips, which are automatically combined to create a short film that can be shared immediately. How do I change the control mode of my Phantom 3? By default, the Remote Controller is set to Mode 2.
Phantom 3 Standard User Manual What is the Phantom 3 flight time? Flight times will vary depending on environmental conditions and usage patterns, but the Intelligent Flight Battery is designed to provide up to 23 minutes of uninterrupted flight time when fully charged. How can I restore a video file if the power is turned off during recording? Do not remove the Micro-SD card from the camera. If it has been removed, place it back in the camera.
Appendix 52 © 2015 DJI. All Rights Reserved.
Appendix Specifications Aircraft Weight (Battery & Propellers Included) 1280 g Max. Ascent Speed 5 m/s Max. Descent Speed 3 m/s Max. Speed 16 m/s (ATTI mode, no wind) Max. Flight Altitude 6000 m Max.
Phantom 3 Standard User Manual Remote Controller and WiFi Range Extender Remote Contoller Frequency 5.725 GHz to 5.825 GHz Transmitting Distance CE: 400 m, FCC: 800 m WiFi Range Extender Frequency 2412MHz to 2462MHz Operating Temperature Range 0°C- 40°C Battery 2600 mAh Lithium Ion Mobile Device Holder Smartphones Working Voltage 120 mA@3.7V Charger Voltage 17.4 V Rated Power 57 W Intelligent Flight Battery ( PH3-4480 mAh-15.2 V ) Appendix Capacity 4480 mAh Voltage 15.
Phantom 3 Standard User Manual Intelligent Orientation Control (IOC) IOC allows users to lock the control orientation of the aircraft in different modes. There are three working modes for IOC that can be selected in the DJI Pilot app. IOC only works when the aircraft is in F-mode, therefore the user must toggle the flight mode switch to activate IOC.
Phantom 3 Standard User Manual FCC Compliance FCC Warning Message This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Phantom 3 Standard User Manual IC Radiation Exposure Statement: This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This W321 should be installed and operated with minimum distance 20cm between the radiator& your body.
The content is subject to change. Download the latest version from http://www.dji.com/product/phantom-3 If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. © 2015 DJI. All Rights Reserved.
