ADVANCED Quick Start Guide Guía de inicio rápido Guide de démarrage rapide Guia de Início Rápido V1.
Contents EN Quick Start Guide 2 ES Guía de inicio rápido 8 FR Guide de démarrage rapide 14 PT Guia de Início Rápido 20
Phantom 4 Advanced EN The DJI PHANTOMTM 4 Advanced is a smart prosumer flying camera capable of shooting 4K video at 60fps and at up to 100mbps, and capturing 20 megapixel stills. Using upgraded TapFlyTM and ActiveTrackTM through the DJI GOTM 4 app, you can fly anywhere visible on your screen or track a moving subject smoothly and easily with a simple tap. The brand new camera uses a 1-inch CMOS sensor offering unprecedented clarity, lower noise, and better quality images. 9 8 7 6 5 4 10 3 2 11 1.
Remote Controller The powerful remote controller of the Phantom 4 Advanced has a transmission range extending up to 4.3 mi (7 km)*. It features physical buttons and dials to control exposure, camera tilt, photo capture and video recording. 1. Power Button 2. Return-to-Home (RTH) Button 3. Control Sticks 4. Status LED 5. Battery Level LEDs 6. Power Port 7. Mobile Device Holder 8. Small Device Positioning Tabs (for mobile phones) 9. Antennas 10. Handle Bar 11. Gimbal Dial 12. Camera Settings Dial 13.
Using Phantom 4 Advanced 1. Download the DJI GO 4 App 2. Watch the Tutorial Videos EN Search for ‘DJI GO 4’ on the App Store or Google Play, and install the app on your mobile device. Watch the tutorial videos at www.dji.com or in the DJI GO 4 app. DJI GO 4 App ● Tutorial Videos DJI GO 4 supports iOS 9.0 (or later) or Android 4.4 (or later). 3. Check the Battery Levels Low Battery Level High Low Battery Level Press once to check the battery level.
5. Prepare the Remote Controller Strong Place your mobile device and adjust the clamp to secure. 3 Connect your mobile device with a USB cable. EN Press the button to release the clamp. Unfold 2 1 Weak 6. Prepare for Takeoff DJI GO 4 App Remove the gimbal clamp from the camera. Power on the remote controller and the aircraft. Launch DJI GO 4, complete the first-time setup, and tap GO FLY. First-time activation requires your DJI account and internet connection.
. Flight EN Ready to Go (GPS) Before taking off, make sure the Aircraft Status Bar in the DJI GO 4 app indicates ‘Ready to Go (GPS)’ or ‘Ready to Go (Vision)’ if flying indoors. In the DJI GO 4 App: Auto Takeoff Auto Landing Return-to-Home (RTH) Normal TapFly ActiveTrack The aircraft will land vertically and stop its motors. The aircraft will take off and hover at an altitude of 4 feet (1.2 meters). Bring the aircraft back to the Home Point. Tap again to stop the procedure.
Specifications ● Aircraft Max Service Ceiling Above Sea Level Max Flight Time Operating Temperature Satellite Positioning Systems Hover Accuracy Range ● Gimbal Controllable Range ● Vision System Velocity Range Altitude Range Operating Range Obstacle Sensory Range Operating Environment ● Camera Sensor Lens ISO Range Mechanical Shutter Electronic Shutter Max Image Size Still Photography Modes Video Recording Modes 45 mph (72 kph) (S-mode); 36mph (58 kph) (A-mode); 31 mph (50 kph) (P-mode) 196 mm Max S
