User's Manual

-21- -22-
GSM anti-theft alarm controller GSM anti-theft alarm controller
23. Host Logs Inquires
In setup state, first enter [44], then press [#] to confirm; The host will make a “tick” sound and
then enter into records list. Press “2” to page up and press “8” to page down. There are 10pcs of
alarm logs in total.
Operating: [44] [#]
LCD display：
24. Host Logs Deleting
In setup state, first enter [45], then press [#] to confirm. The host makes a “tick” sound, and
then a voice prompts “setting completed”. Thus host logs are removed.
Operating: [45] [#]
LCD display：
25.SMS Notification of Arm/Disarm
In setup state, first enter [46], then choose command key[0/1], that means whether to send
SMS to the user when Arm or Disarm, finally press [#] to confirm. The host makes a “tick”
sound, and then a voice prompts “setting completed”. Default: not send
Operating: [46] [X] [#]
“X=1” indicates: send.
“X=0” indicates: not send
Example: send out SMS to user's mobile phone
Operating: [46] [1] [#]
LCD display：
26. System Clock Setting
In setup state, use keypad to input [48], then input the last 2 digits [YY] of the present year,
and then the 2 digits [MM] of the month, and then the two digits [DD] of the date, and then the
two digits [hh] of the hour (24-hour system), and then the two digits [mm] of the minute, and
finally enter [#] to confirm. You will hear a “tick” sound and a voice prompt: “setting completed”.
Operating: [48] [YY] [MM] [DD] [hh] [mm] [#]
“YY” indicates: the last 2 digits of the present year
“MM” indicates: the 2 digits of the present month
“DD” indicates: the 2 digits of the present date
“hh” indicates: the 2 digits of the present hour(24 hour system)
“mm” indicates: the 2 digits of the present minute
Example: set the time as 17:30, June, 12th, 2012
Operating: [48] [12] [06] [12] [17] [30] [#]
LCD display：