User's Manual

-23- -24-
GSM anti-theft alarm controller GSM anti-theft alarm controller
27.SMS Phone Number Setting
In setup state, enter [49~50], then input phone number, finally press [#] to confirm. The host
makes a “tick” sound, and then a voice prompts “setting completed”.
Note: input [49] to set the first SMS phone number, input [50] to set the second SMS phone
Operating: [XX] [YY…YY] [#]
XX indicates: address code [49-50] of 1-2 group SMS alarm phone number
YY…YY Indicates: phone number
Example: set 13911112245 to be the first group alarm phone number
Operating: [49] [13911112245] [#]
LCD display：
28.SMS Phone Number Deleting
In setup state, enter [49~50], finally press [#] to confirm. The host makes a “tick” sound, and
then a voice prompts “setting completed”.
Operating: [49] [#]
Example: Deleting the first SMS alarm phone number
Operating: [49] [#]
LCD display：
29.Alarm Phone Number Setting
In setup state, enter [51] ~ [56], then input phone number, finally press [#] to confirm. The
host makes a “tick” sound, and then a voice prompts “setting completed”.
Operating: [XX] [YY…YY] [#]
XX indicates: address code [51] ~ [56] of 1-6 group alarm phone number
YY…YY indicates: phone number
Example: set 13811110751 to be the first group alarm phone number
Operating: [51] [13811110751] [#]
LCD display：
30.Alarm Phone Number Deleting
In setup state, enter [51] ~ [56], then press [#] to confirm. The host makes a “tick” sound, and
then a voice prompts “setting completed”.
Operating: [XX] [#]
XX indicates: address code [51] ~ [56] of 1-6 group alarm phone number
Notes: Only the pre-set alarm
phone number can realize
remote control.