User's Manual

-25- -26-
GSM anti-theft alarm controller GSM anti-theft alarm controller
Example: deleting the first group alarm phone number
Operating: [51] [#]
LCD display：
31.Defense Zone Alarm Type Setting
In setup state, first input address code [60] , choose the corresponding defense zone code
[02~99] , and then input [1~8] defense zone alarm type, finally press [#] key to confirm. Voice
prompts: setting completed.
Operating: 【60】 【XX】 【 A 】 【 # 】
XX indicates defense zone code: [02~99] matching 02 to 99 defense
zones correspondingly
A represents alarm type: [1] SOS Alarm, [2] fire alarm, [3] gas leak alarm,
[4] door lock alarm, [5] hall alarm, [6] window alarm,
[7] balcony alarm, [8] perimeter alarm.
Example: set defense zone 10 to be fire alarm type
Operating: 【60】 【 10 】 【 2 】 【 # 】
LCD display：
32. Host GSM Signal Checking
In setup state, enter [62] and then press [#] to confirm. The host makes a “tick” sound, and
then a voice prompts “setting completed”. GSM signal value is displayed.
Operating: [62] [#]
LCD display：
33. LCD Backlight Duration Setting
In setup state, enter [63] and input [00-99] seconds, then press [#] to confirm. The host
makes a “tick” sound, and then a voice prompts “setting completed”. Default time: 20 seconds.
Operating: [63] [XX] [#]
XX indicates: backlight lasting time
Example: set time to 49s
Operating: [63] [49] [#]
LCD display：