User's Manual

13
projector’s DC in port and the power adapter into an outlet. Once connected, the
power indicator light will illuminate on the projector.
• To power the projector with the built-in battery, simply turn the projector on.
• To power the projector with a battery bank or computer, connect the USB 2.0 Type C
charging cable to the projector’s DC port and the other end to the USB power source.
IMPORTANT: Fully charge the battery before first use (approx. 4-5 hours).
3. Power on the projector by pressing and holding the power button for 3 seconds.
Allow the projector 15 to 30 seconds to fully start up and make image adjustments.
connecTing The projecTor To a Wireless neTWork
1. Select “Settings” from the projector’s home screen.
2. Scroll to “Wi-Fi” on the settings menu.
3. Select “Scan” to search for nearby available networks.
4. Select the desired network from the listed options.
5. Enter the required network credentials, then select “Connect.” Allow the projector and
the network a few seconds to sync.