User's Manual

19
1. Connect the projector to a wireless network (see the “Connecting the Projector to a
Wireless Network” on page 13 of this manual).
2. On the iOS device download and install the Miroir Wireless App.
3. Once installed, launch the Miroir Wireless App.
4. While on the projector’s home screen, press the “Input” button on the remote.
5. Select DLNA on the pop up menu. The projector will automatically connect to
the iOS device.
IMPORTANT:
The iOS device and your projector must be on the same wireless network to
establish a wireless connection with the Miroir Wireless App.
6. Select the content to project from the folders inside the Miroir Wireless app on
the iOS device.
CHANGING CONNECTION INPUT
Press the “Input” button on the remote to launch the connection pop up menu to swap
between the wireless input and HDMI input.