User's Manual

20
image adjusTmenTs
ADJUSTING IMAGE ELEVATION
Place the projector on a hard flat surface. Stabilize the battery side of the projector with one
hand and gently lift the lens side of the projector with your other hand.
ADJUSTING IMAGE FOCUS
Simply roll the focus wheel control upwards and downwards to fine-tune the image.
ADJUSTING VERTICAL KEYSTONE
After powering on, or adjusting the image elevation, the projector will automatically adjust
the display screen to the best condition (vertical keystone correction up to +/- 40 degrees).
On startup, allow the projector 15 to 30 seconds to fully start up and make this adjustment.
audio
The projector has a built-in speaker that will be automatically used for sound when the
projector is powered on. Optionally, connect an external speaker for bigger sound.