User manual

18
Menu point 4: SETUP - SETUP function 1: DIMMER
press
4x
OK
SETUP
DIMMER 8
OK
AMP
Introduction:
The brightness of the screen on the front pa-
nel can be set to any of eight levels (1..8):
'DIMMER 1' = darkest level
:
'DIMMER 8' = brightest level
This facility allows you to adjust the screen
to suit the lighting conditions in your liste-
ning room.
Operation:
To alter screen brightness press the remote
control buttons in the sequence shown above.
The screen then shows the current brightness
level (e.g. 3):
'DIMMER 3'
You can change the current setting by pres-
sing the remote control buttons
or
.
Any change you make takes effect immedia-
tely. The function is terminated by pressing
the
button.
If none of the menu control buttons
(
,
/
or
) are pressed
for a period of about ten seconds, the unit
interrupts the special functions menu and
reverts to the standard display. (time-out)