User manual

32
Menu point 2: PRESET - PRESET function 3: ERASING A PRESET
OK
OK
P28 CLEAR
SRC
press
2x
Introduction:
Presets which contain stations of such low
quality that they are not worth listening to, or
which contain a duplicate station on a differ-
ent frequency, should simply be erased.
Under certain circumstances, e.g. after a hou-
se-move, you may find it necessary to erase
all the pre-sets. In this case please read the
section entitled 'Tuner section' in the 'Trou-
ble Shooting' Chapter.
Operating:
First call up the preset to be erased, either by
entering the number directly or using the 


/ 

 buttons, then press the remote control
buttons in the sequence shown above.
The selected preset is shown in the display as
follows:
‘P28 CLEAR’
If none of the menu control buttons
(

, 

 / 

 or 

) are pressed
for a period of about ten seconds, the unit
interrupts the special functions menu and
reverts to the standard display. (time-out)
Pressing the 

 button erases the preset
and terminates the special functions menu.
Note:
If you attempt to store an invalid preset num-
ber (xx), the machine responds with an error
message on the screen: 'Pxx ERROR'; the
tuner then terminates the special functions
menu.