User manual

41
Menu point 3: DISPLAY
SRC
OK
DIS TRACK
press
2x
Introduction:
Most CDs contain several tracks. However,
the tracks on some CDs can be very long,
especially when they contain classical music.
To help you re-locate a particular passage
within a long track, the system offers the fa-
cility to display the elapsed time of the cur-
rent track in addition to the track number, in
place of the operating status message
'PLAY'.
Operation:
To switch the track play time display on or
off press the remote control buttons in the
sequence shown above. The screen then
shows the message
'DIS TIME'.
Pressing the 

 or 

 button briefly alter-
nates between the two display variants on the
screen:
'DIS TIME' and 'DIS TRACK'.
If none of the menu control buttons
(

, 

 / 

 or 

) are pressed
for a period of about ten seconds, the unit
interrupts the special functions menu and
reverts to the standard display. (time-out)
Press the 

 button to accept the cur-
rent display option shown on the screen.