Mounting Instruction

GLUEING DIFFUSORS

This manual is for the following products : WDS-7, Diusor Wave.

Open the package carefully! Inserting sharp objects

into the package can damage the diuser. Avoid

using long, sharp tools for opening the package!

UNBOXING

While determining the mounting positions, it helps

to mark the walls and ceiling using a level and

tape measure, in order to achieve even spacing in

relation to corners and sound sources.

DETERMINE THE POSITION

Carefully remove the products from the package

and remove the protective lm. Also remove the

mounting clips and set them aside.

REMOVE PRODUCTS

FROM PACKAGING

MOUNTING INSTRUCTIONS

The following tools are needed for installation:

✓ Box Cutter ✓ Level

✓ Caulk Gun ✓ Folding ruler or tape measure

✓ Pencil ✓ t.akustik glue

We recommend using our t.akustik glue for installation.

TOOLS

PAGE 1
EN MOUNTING INSTRUCTIONS GLUEING DIFFUSORS This manual is for the following products : WDS-7, Diffusor Wave. TOOLS The following tools are needed for installation: ✓ Box Cutter ✓ Caulk Gun ✓ Pencil ✓ Level ✓ Folding ruler or tape measure ✓ t.akustik glue We recommend using our t.akustik glue for installation. UNBOXING Open the package carefully! Inserting sharp objects into the package can damage the diffuser.
PAGE 2
EN PREPARE THE CAULK GUN Carefully open the glue cartridge using a utility knife. Take care to point the knife away from your body. Thread the included nozzle onto the opening. Insert the cartridge into the caulk gun. For thicker lines of glue, you can use the knife to enlarge the opening of the nozzle. APPLY THE GLUE Apply the glue to the back of the diffuser in an even line along the outer edge.