Mounting Instruction

Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 456772_456773_456592_456558_19.03.2021
DRUM SHIELDS
Open the package carefully! Inserting sharp
objects into the package can damage the drum
shields. Avoid using long, sharp tools for opening
the package!
UNBOXING
Assemble the drum shield in a semicircle
around the drum set. That’s it!
A S S E M B LY
Carefully remove the products from the package.
The acrylic panels are covered with a protective
lm. Remove the protective lm and take the
connecting brackets out of the package.
REMOVE PRODUCTS
FROM PACKAG ING
Remove the connecting brackets from the package.
Attach one bracket to the edge of panel 1. Connect
panel 1 to panel 2 by sliding the second panel into
the bracket.
CONNECT THE PANELS
MOUNTING INSTRUCTIONS
The individual panels of the drum shields are easier to install by two people.
TIP:
This product is intended to be used to optimise the room acoustics. Any other use or use un-
der other operating conditions is considered to be improper and may result in personal inju-
ry or property damage. No liability will be assumed for damages resulting from improper use.
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within
reach of babies and young children. Choking hazard!
For the transport and protective packaging, environmentally friendly materials have
been chosen that can be supplied to normal recycling. Ensure that plastic bags, pa-
ckaging, etc. are properly disposed of. Do not just dispose of these materials with
your normal household waste, but make sure that they are collected for recycling.
Please follow the notes and markings on the packaging.
EN
Find more solutions for
your room on our website:
www.takustik.com
Share your installation
with us on Instagram:
www.takustik.com/instagram
Find more installation
guides on YouTube:
www.takustik.com/youtube