Mounting Instruction

These instructions are for the following products: Highline series (A1, A2, A3) WAS-7, WAW-7,WAW-7 Flock, HiLo products
(N25,N40, N70, N80 etc.) Melamine products (Wave, Wedges, Pyramid, Nook Sets etc.), SA products (N30,N80,N50,N65 etc.) and
other modules made of acoustic foam.
The following tools are needed for installation:
✓ Box Cutter ✓ Level
✓ Caulk Gun ✓ Folding ruler or tape measure
✓ Pencil ✓ t.akustik glue
We recommend using our t.akustik glue for installation.
TOOLS
Open the package carefully! Inserting sharp objects
into the package can damage the absorber. Avoid
using long, sharp tools for opening the package!
UNBOXING
While determining the mounting positions, it helps
to mark the walls and ceiling using a level and
tape measure, in order to achieve even spacing in
relation to corners and sound sources.
DETERMINE THE
MOUNTING POSITION
Carefully remove the absorbers from the package.
Type WAS-7 elements are nested in the package.
Carefully separate the two absorbers. This is
especially important for melamine variants.
REMOVE PRODUCTS
FROM PACKAGING
MOUNTING INSTRUCTIONS
GLUEING ABSORBERS
EN