Data Sheet
Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 337922_24.06.2021
EN
This product is intended to be used to optimise the room acoustics. Any other use or use un-
der other operating conditions is considered to be improper and may result in personal inju-
ry or property damage. No liability will be assumed for damages resulting from improper use.
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within
reach of babies and young children. Choking hazard!
When cutting with a knife or a cutter, pay attention not to hurt your fi nger/hands.
Risk of cutting!
For the transport and protective packaging, environmentally friendly materials have
been chosen that can be supplied to normal recycling. Ensure that plastic bags, pa-
ckaging, etc. are properly disposed of. Do not just dispose of these materials with
your normal household waste, but make sure that they are collected for recycling.
Please follow the notes and markings on the packaging.
Find more solutions for
your room on our website:
www.takustik.com
Share your installation
with us on Instagram:
www.takustik.com/instagram
Find more installation
guides on YouTube:
www.takustik.com/youtube
DATA SHEET
KICK DRUM ABSORBER
✓ Acoustic foam for bass drums
✓ Is used to control the resonance behaviour
✓ batter and resonator head are damped at the same time
✓ Adjustable to all bass drum sizes
✓ Cuts for easy tailoring to standard sizes
✓ Flexible material for best fi t
✓ Material: polyester acoustic foam
✓ Bulk density: 22.0 ± 2.0 kg/m
3
✓ Flame retardened acc. to FMVSS 302
(burning rate < 100 mm / min.)
✓ Colour: anthracite
✓ Dimensions (W × H × D): 650 mm × 45 mm × 510 mm
✓ Scope of delivery: 1 piece
FEATU R E S
„B“-Line: 20"
„B“-Line: 18,5"
„B“-Line: 17,5"
„B“-Line: 16,5"
„A“-Line: 14"
„A“-Line: 16"
„A“-Line: 18"
„A“-Line: 20"
✓ Cut along the "A" notches to shorten the absorber
to the following shell depths:
14 inches, 16 inches, 18 inches or 20 inches
✓ Cut along the "B" notches to shorten the absorber
to the following shell depths:
16.5 inches, 17.5 inches, 18.5 inches oder 20 inches
We recommend using a sharp-bladed safety cutter with auto-
matic blade retract for cutting the absorber.
SHORTEN THE ABSORBER