Mounting Instruction

ABSORBE R

These instructions are for the following product: PET Ceiling Absorber 180, PET Ceiling Absorber 120

The following tools are needed for installation:

✓ Level ✓ Drilling machine ✓ Pencil

✓ Folding ruler ✓ Drill bits

TOOLS

Open the package carefully! Inserting sharp objects

into the package can damage the absorber. Avoid

using long, sharp tools for opening the package!

UNBOXING

Carefully remove the products from the package and

read the mounting instructions carefully. Remove the

mounting accessories and the absorber.

REMOVE PRODUCTS

FROM PACKAGING

MOUNTING INSTRUCTIONS

The following mounting accessories are included for

installation of the absorber:

✓ 4 × dowel ✓ 4 × adjustable wire rope

✓ 4 × screw M4×40 ✓ 1 × PET eece absorber

✓ 4 × eyelet ✓ 1 × drilling template

MOUNTING ACCESSORIES

Make sure to examine the condition and load carrying capacity of the ceiling before installation.

TIP:

PAGE 1
EN MOUNTING INSTRUCTIONS ABSORBER These instructions are for the following product: PET Ceiling Absorber 180, PET Ceiling Absorber 120 TIP: Make sure to examine the condition and load carrying capacity of the ceiling before installation.
PAGE 2
USING THE TEMPLATE / DETERMINE THE POSITION Align and attach the template to the ceiling. Use the template to mark the drilling locations through the paper using a pencil. Alternatively you can measure the distances of the dowels inserted in the absorber and mark the measured distances for the drilling holes at the ceiling. DRILL THE HOLES Drill the holes at the markings using the drilling machine.
PAGE 3
FIX THE ABSORBER TO THE WIRE ROPES Insert the hooks of the adjustable wire ropes into the eyelets of the absorber. ADJUSTING HEIGHT Adjust the height of the absorber as you wish. Fix the excess wire rope using cable straps. USING ABSORBER Now you can use the absorber. Find more solutions for your room on our website: www.takustik.com Share your installation with us on Instagram: www.takustik.com/instagram This product is intended to be used to optimise the room acoustics.