Mounting Instruction

MOUNTING INSTRUCTIONS

ABSORBER

These instructions are for the following product: PET Absorber Plate ex 140

Slide the feet into the provided recesses in the lower

absorber plate.

FIXING THE FEET

Open the package carefully! Inserting sharp objects

into the package can damage the absorber. Avoid

using long, sharp tools for opening the package!

UNBOXING

Carefully remove the products from the package and

read the mounting instructions carefully. Remove the

mounting accessories and the absorber plates and

remove the protective lm of the absorber plates.

REMOVE PRODUCTS

FROM PACKAGING

Get the absorber plates, the connectors and the feet

ready.

MOUNTING ACCESSORIES

PAGE 1
EN MOUNTING INSTRUCTIONS ABSORBER These instructions are for the following product: PET Absorber Plate flex 140 UNBOXING Open the package carefully! Inserting sharp objects into the package can damage the absorber. Avoid using long, sharp tools for opening the package! REMOVE PRODUCTS FROM PACKAGING Carefully remove the products from the package and read the mounting instructions carefully. Remove the mounting accessories and the absorber plates and remove the protective film of the absorber plates.
PAGE 2
FIXING THE CONNECTORS Place the lower absorber plate on the feet and slide the connectors into the three provided recesses of the absorber plate. CONNECTING THE ABSORBER PLATES Slide the upper absorber plate with the three recesses into the three connectors at the lower absorber plate. Find more solutions for your room on our website: www.takustik.com Share your installation with us on Instagram: www.takustik.com/instagram This product is intended to be used to optimise the room acoustics.