Mounting Instruction

ABSORBE R

These instructions are for the following products: PET Wall Absorber 120, PET Wall Absorber 60

MOUNTING INSTRUCTIONS

Open the package carefully! Inserting sharp objects

into the package can damage the absorber. Avoid

using long, sharp tools for opening the package!

UNBOXING

While determining the positions of the holes, it

helps to mark the walls using a level and a folding

ruler, in order to achieve even spacing in relation

to corners, sound sources and other absorbers.

DETERMINE THE POSITION

Carefully remove the products from the package and

remove the protective lm. Also remove the included

dowels and L-hooks and set them aside.

REMOVE PRODUCTS

FROM PACKAGING

The following tools are needed for installation:

✓ Level ✓ Drilling machine

✓ Pencil ✓ Drill bits

✓ Screwdriver ✓ Dowels (4 × 6 mm)

✓ Folding ruler ✓ L-hooks

TOOLS

Make sure to use the correct type of dowels for your

mounting surface (drywall, masonry, concrete, etc.).

PAGE 1
EN MOUNTING INSTRUCTIONS ABSORBER These instructions are for the following products: PET Wall Absorber 120, PET Wall Absorber 60 TOOLS The following tools are needed for installation: ✓ Level ✓ Pencil ✓ Screwdriver ✓ Folding ruler ✓ Drilling machine ✓ Drill bits ✓ Dowels (4 × 6 mm) ✓ L-hooks Make sure to use the correct type of dowels for your mounting surface (drywall, masonry, concrete, etc.). UNBOXING Open the package carefully! Inserting sharp objects into the package can damage the absorber.
PAGE 2
EN DRILL THE HOLES Drill the holes at the markings using the drilling machine. INSERT DOWELS + MOUNTING L-HOOKS Insert the dowels into the drilled holes and screw the L-hooks into the dowels for installing the absorber. ATTACHING THE ABSORBER Now you can attach the absorber to the L-hooks. Install more elements if you wish. That‘s it! TIP: Make sure to examine the condition and load carrying capacity of the wall before installation. Find more solutions for your room on our website: www.takustik.